PAMman Posted March 28, 2007 Report Share Posted March 28, 2007 Can anyone please explain how the rotating bezel is assembled on the rep Navitimer. I have one where the bezel is loose and can actually be lifted partially off the case. There seems to be 3? screws that hold the upper bezel onto a lower internal ring but I can't figure out how to get at them to tighten the whole slide rule / bezel up. Can anyone help please? Link to comment Share on other sites More sharing options...
watchman12345 Posted March 28, 2007 Report Share Posted March 28, 2007 Its quite difficult. The bezel cant be lifted off like a "traditional" bezel construction. To remove the bezel you have to remove he movement from the case and press out the crystal. Then remove the slide rule circle. The 3 screws are then visible. I sent mine to The Zigmeister to be honest but took apart an old navitimer and this is what I saw. Link to comment Share on other sites More sharing options...
PAMman Posted March 28, 2007 Author Report Share Posted March 28, 2007 Thanks for the help, although maybe this sounds like something that I won't tackle myself. Link to comment Share on other sites More sharing options...
watchman12345 Posted March 28, 2007 Report Share Posted March 28, 2007 The screws looked messy on mine too. Another option is to install an o-ring under the bezel, but again removing the movement and crystal is a job you'd need to be competent at or you could ruin your watch. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now