stenofsweden Posted April 11, 2006 Report Share Posted April 11, 2006 Hey Compandres, I have received a Tag Link Chrono who is for a friend, a great watch but.... Chrono seconds does not reset to 12, it reset at 5 sec later. Is it fixable by my own, or is it enough to send it back? Cheers /Sten Link to comment Share on other sites More sharing options...
Guest TTK Posted April 11, 2006 Report Share Posted April 11, 2006 (edited) Hi....if it's the chrono quartz.( well it would be ...wouldn't it).........here's what you do....! 1. Make sure the seconds hand is reset and not running...! 2. Pull out the crown to the position for adjusting the hour and minute hands...! 3. Press the top chrono pusher at 2'o clock.........the seconds hand should sweep round one click at a time....if you hold the button down.....it will sweep quickly....! 4. Let it sweep till it sits at 12.....then push the crown back in and screw down...! Try the chrono function now...it should be reset to 12. BTW.....did I sell you this one.....? Edited April 11, 2006 by TTK Link to comment Share on other sites More sharing options...
stenofsweden Posted April 11, 2006 Author Report Share Posted April 11, 2006 Hi, Very much thanks for the tip, but it didn’t work out... It’s actually a TH Link with Asia 7750 Any ideas? Cheers Sten Hi....if it's the chrono quartz.( well it would be ...wouldn't it).........here's what you do....! 1. Make sure the seconds hand is reset and not running...! 2. Pull out the crown to the position for adjusting the hour and minute hands...! 3. Press the top chrono pusher at 2'o clock.........the seconds hand should sweep round one click at a time....if you hold the button down.....it will sweep quickly....! 4. Let it sweep till it sits at 12.....then push the crown back in and screw down...! Try the chrono function now...it should be reset to 12. BTW.....did I sell you this one.....? Link to comment Share on other sites More sharing options...
Rolexman Posted April 11, 2006 Report Share Posted April 11, 2006 (edited) The hand probably slipped after resetting or wasn't attached firmly from the biginning... If you've never worked on a watch you're probably better of bringing it to a jeweler! In a nutshell: You need to unscrew the case back, remove the crown/stem, take out the movement and dial, gently push back the hand in the correct position (after you've stopped and reseted the chronograph). If it slips again you need to put a micro drop of glue in the shaft of the chrono hand. Hope this helps. Edited April 11, 2006 by Rolexman Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now