Panerai Deployant

[chrisbailey86]

Hi Guys,

Now before anyone tells me to search the forums I have been doing so for ages! I have just recieved my Panerai deployant clasp, and cant figure out how to fit it. I searched the forums, and there was a useful thread, but the pictures have since been deleted so no joy.

Any help would be usefull, because this is driving me insane.

I'm not an idiot, so surely some of you guys have had this problem before?

Chris

[Pugwash]

Now before anyone tells me to search the forums I have been doing so for ages! I have just recieved my Panerai deployant clasp, and cant figure out how to fit it. I searched the forums, and there was a useful thread, but the pictures have since been deleted so no joy.

Post a photo of your deployant as I'm not sure what the problem is.

[Croolis]

start with the correct tools ..

size 1 to size 5 hammers,

and keep a size 10 handy just incase the watch

still works afterwards

a photo would help a lot in identifying

how best to weild the hammers!

[Highflyingclive]

Look carefully and you will see that one end of the "T-piece" (the bit that goes into the buckle end of the strap) has a screwdriver slot in it. Simply unscrew, remove, wriggle the remaining bit into your strap and then replace the part you removed.

Be careful. Some of these deployants have two removeable parts. They can be a bugger to assemble again - yfor these, you'll need two screwdrivers, three hands and a lively sense of humour.

Having fitted it, you will probably find that the deployant is bloody uncomfortable and you'll will remove it and revert to a tang buckle as soon as possible.