Lost a part realigning bezel

[dgruter]

I was recently realigning the bezel in my Rolex LV Sub replica and lost a part. Now the bezel no longer clicks. It just rotates.

I found the part, but its not a spring mechanism, its a two millimeter metal ring with 2 spikes protunding out from the middle.

I tried to but it back in place, but now the bezel is very difficult to turn and the clicking noise is now very harsh and almost raspy.

Any input or help would be appreciated.

[GhostfaceZX]

I was recently realigning the bezel in my Rolex LV Sub replica and lost a part. Now the bezel no longer clicks. It just rotates.

I found the part, but its not a spring mechanism, its a two millimeter metal ring with 2 spikes protunding out from the middle.

I tried to but it back in place, but now the bezel is very difficult to turn and the clicking noise is now very harsh and almost raspy.

Any input or help would be appreciated.

Your bezel might be pressed down too tightly - try lifting it up all around as if you were trying to remove it again.