yt74 Posted August 12, 2007 Report Share Posted August 12, 2007 I bought this from a member on another board for a good price, but it had some problems, one being a stuck pusher. Apparently the previous owner had dropped it on the floor and broke one of the pushers. The guy I bought it from had got the pusher to work but it was permanently half screwed in. I thought it would be an easy fix, but when I got it apart I can't figure it out. When I disassembled and re-assembled the functioning pushers I think I broke off the other pusher stem, because they both look the same. I have been looking all over the board for something that would help, but it seems like most of what I found concerns the DW 6263 and not the Seagull hand wind like this one. Anybody have any ideas or at least somewhere to get parts? Link to comment Share on other sites More sharing options...
bertieng Posted August 13, 2007 Report Share Posted August 13, 2007 I bought this from a member on another board for a good price, but it had some problems, one being a stuck pusher. Apparently the previous owner had dropped it on the floor and broke one of the pushers. The guy I bought it from had got the pusher to work but it was permanently half screwed in. I thought it would be an easy fix, but when I got it apart I can't figure it out. When I disassembled and re-assembled the functioning pushers I think I broke off the other pusher stem, because they both look the same. I have been looking all over the board for something that would help, but it seems like most of what I found concerns the DW 6263 and not the Seagull hand wind like this one. Anybody have any ideas or at least somewhere to get parts? You need a need pusher, or at least the push button with the stem intact. I will try to look into my tray to see if I have one for you. Will let you know. Link to comment Share on other sites More sharing options...
yt74 Posted August 14, 2007 Author Report Share Posted August 14, 2007 You need a need pusher, or at least the push button with the stem intact. I will try to look into my tray to see if I have one for you. Will let you know. Thanks, I actually need 2, I broke the other one messing around with it... If you don't have any spares a recommendations on where to buy one would be appreciated. Link to comment Share on other sites More sharing options...
RWG Technical Posted August 14, 2007 Report Share Posted August 14, 2007 Most pushers are standard sizes, normally 2.5mm case thread size. You should be able to source some generic pushers to replace these. Ofrei is asking $42 each for replacements, I think I have a supplier that probably carries them for less, but would have to look... If I forget to look please try and remind me, keeping in mind my pm is shut down for a while. RG Link to comment Share on other sites More sharing options...
bertieng Posted August 14, 2007 Report Share Posted August 14, 2007 If I am not wrong, those from Otto is not the correct ones for the vintage model, rather they are for the modern Daytona. Please correct me if I am wrong. Link to comment Share on other sites More sharing options...
yt74 Posted August 15, 2007 Author Report Share Posted August 15, 2007 If I am not wrong, those from Otto is not the correct ones for the vintage model, rather they are for the modern Daytona. Please correct me if I am wrong. I think you are correct. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now