Montage123 Posted August 26, 2007 Report Share Posted August 26, 2007 Hi all, Have just received my first-eve rep, a TAG Link chrono from Josh (6 days total time from order to Sunday afternoon home delivery in Chicago!). But I'm concerned that the stem will neither turn nor pull out - at all. Am I missing something? As a newbie, I'm not sure if I need more information on how to adjust the watch, or if I have a defective one... Your comments would be greatly appreciated. Thanks. SA Quote Link to comment Share on other sites More sharing options...
FxrAndy Posted August 26, 2007 Report Share Posted August 26, 2007 Not sure if the tag link has a screw down crown, any one else?? Quote Link to comment Share on other sites More sharing options...
anton Posted August 26, 2007 Report Share Posted August 26, 2007 I used to own a gen chrono and AFAIK, there was no screw-down crown. But that could differ between models. Quote Link to comment Share on other sites More sharing options...
maxmilian Posted August 27, 2007 Report Share Posted August 27, 2007 The Tag link chrono has a screw down crown Quote Link to comment Share on other sites More sharing options...
FxrAndy Posted August 27, 2007 Report Share Posted August 27, 2007 In that case you will have to first unscrew the crown, if you look directly at it try to unscrew it by turning it anti clockwise after 2 to 3 turns it should be free and pop out slightly to the winding position, you can then also set the time ect as a normal watch, once you have finished push it back in screw it up and away you go. One point to not i dont know how well the treads are made on the link but just be carefull not to over tighten or cross thread the crown. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.