bezel markers

[dadog13]

Hi!

This is not the usual...I've lost a PAM187 bezel marker - do you have a replacement one...but since a year ago, I don't wear my 187 because I've lost some bezel markers...in the meantime I got the replacement case and now the easiest way would be to take off the bezel markers from the new case and to re-glue them to the old one...I was thinking to switch the cases but this procedure takes a watchsmith to do it since the new one came w/o the crystal...and I've noticed the markers of the "30" min to be kind of defective on the new case, so I prefer to transplant the missing ones on the old case from the new one...

So the question would be, how to take off the bezel markers from the new case w/o damaging them...I think I remember that one member posted that he took off the bezel markers by putting the case in hot water so the glue becomes weaker, and then it's easier to remove the...If you now a way how to do it, or just to confirm that the previous described way is correct, I would appreciate it a lot!

Tnx in advance...

[Watchmeister]

I know the answer on the Honpo case and it is very surprising. There are neither screws nor glue. The markers are pressure fit into the bezel. So on mine Ziggy just swapped them. In fact, if I can find a way to get t-swiss-t onto my 7753 I am going to get the markers rhodium plated.