Jawo Posted November 14, 2007 Report Share Posted November 14, 2007 I just received my Arktos from Andrew, and it is a beauty. I have discovered a flaw though, that I have never seen before. There are 2 small dents on both sides of the crown lever. It is smooth and I can't even feel it with my finger. Do you have any ideas? Andrew is going to see if he can ship me a replacement crown guard, so I trust this will be resolved. Here is a pic: Quote Link to comment Share on other sites More sharing options...
Watchmeister Posted November 14, 2007 Report Share Posted November 14, 2007 Strange dents? Somebody whacked it. I am sure Andrew will send you another CG and they just screw right on and off. If he doesn't they are readily available from dealers. Quote Link to comment Share on other sites More sharing options...
pete2528ca Posted November 17, 2007 Report Share Posted November 17, 2007 if they aren't deep, and what you can do in the mean time is get some emery cloth, and some fine sand paper and sand/buff them out. i had some dents in a crown guard on the edge that were mysteriously placed there when i took a pair of pliers to try to squeeze the lever and tighten it up. anyway, a bit of emery quickly buffed out the dent and the fine sand paper gave it the original finish. at this point you have nothing to lose because you have a new one coming. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.