Strange dents on 092 Arktos

[Jawo]

I just received my Arktos from Andrew, and it is a beauty. I have discovered a flaw though, that I have never seen before. There are 2 small dents on both sides of the crown lever. It is smooth and I can't even feel it with my finger. Do you have any ideas? Andrew is going to see if he can ship me a replacement crown guard, so I trust this will be resolved. Here is a pic:

[Watchmeister]

Strange dents? Somebody whacked it. I am sure Andrew will send you another CG and they just screw right on and off. If he doesn't they are readily available from dealers.

[pete2528ca]

if they aren't deep, and what you can do in the mean time is get some emery cloth, and some fine sand paper and sand/buff them out. i had some dents in a crown guard on the edge that were mysteriously placed there when i took a pair of pliers to try to squeeze the lever and tighten it up. anyway, a bit of emery quickly buffed out the dent and the fine sand paper gave it the original finish. at this point you have nothing to lose because you have a new one coming.