pitimany Posted June 2, 2006 Report Share Posted June 2, 2006 (edited) Took the two watches out, try 1 doesn't move and 2 went crazy. 1) It was having stopped and goes problems before, I got it used. 2) This is a new one, never use it before. wind up two or three turns and the hands go so fast around (cool but broken) Does anybody fix these things, or I need new movements? Please suggestions Thanks P :yucky: I got another broken from jimbo this week. this is killing me. Edited June 2, 2006 by pitimany Link to comment Share on other sites More sharing options...
ubiquitous Posted June 2, 2006 Report Share Posted June 2, 2006 Ouch! Not sure who you can try for repairs/overhauls these days- Ziggy's not touching them anymore, spare parts are nearly impossible to source- Even if you get a movement from DW to replace the broken with, there's no guarantee as to what condition that one will be in. My recommendation- Us DW owners need to put our heads together and come up with some sort of collective solution to these movements- A replacement movement that won't break the bank, easy to source with replacement parts available. Link to comment Share on other sites More sharing options...
krustybrand Posted June 2, 2006 Report Share Posted June 2, 2006 Took the two watches out, try 1 doesn't move and 2 went crazy. 1) It was having stopped and goes problems before, I got it used. 2) This is a new one, never use it before. wind up two or three turns and the hands go so fast around (cool but broken) Does anybody fix these things, or I need new movements? Please suggestions Thanks P :yucky: I got another broken from jimbo this week. this is killing me. If you decide to source new movments, I'll buy any of the broken ones from you. Seriously. PM me anytime. Link to comment Share on other sites More sharing options...
olivia Posted June 2, 2006 Report Share Posted June 2, 2006 "2) This is a new one, never use it before. wind up two or three turns and the hands go so fast around (cool but broken) " A missing palet fork will do exactly that. Not engaging the escape wheel. Link to comment Share on other sites More sharing options...
Guest avitt Posted June 2, 2006 Report Share Posted June 2, 2006 You've got a few choices: 1) Have it repaired. You will need a good watchmaker, and a budget of about $300-$400 each. Since necessary parts would not be available, this is not recommended. 2) Buy replacement movements. DW sells these (I believe they are about $100 each). As Ubi mentioned, there's no guarantee that the new movements won't develop some problems as well. 3) Buy VJ23's to replace the DW movements. Halley has hinted that this will work, but I don't think that anyone has actually completed this upgrade. You will need a new hand set as well. If this works, it's a very good solution. 4) Sell the two watches for parts, and use the funds towards a VJ72 based Daytona. Most expensive, but will leave you with the best rep. Link to comment Share on other sites More sharing options...
leitztozeiss Posted June 2, 2006 Report Share Posted June 2, 2006 You've got a few choices: 1) Have it repaired. You will need a good watchmaker, and a budget of about $300-$400 each. Since necessary parts would not be available, this is not recommended. 2) Buy replacement movements. DW sells these (I believe they are about $100 each). As Ubi mentioned, there's no guarantee that the new movements won't develop some problems as well. 3) Buy VJ23's to replace the DW movements. Halley has hinted that this will work, but I don't think that anyone has actually completed this upgrade. You will need a new hand set as well. If this works, it's a very good solution. 4) Sell the two watches for parts, and use the funds towards a VJ72 based Daytona. Most expensive, but will leave you with the best rep. Are hands for the v23 solution difficult to locate separate from the DW all-in-one v72 kit? Link to comment Share on other sites More sharing options...
Guest avitt Posted June 2, 2006 Report Share Posted June 2, 2006 Are hands for the v23 solution difficult to locate separate from the DW all-in-one v72 kit? Hand sets fo rthe VJ72 should fit the VJ23. You can find them on eBay, occasionally. DW also sells them. Link to comment Share on other sites More sharing options...
ubiquitous Posted June 2, 2006 Report Share Posted June 2, 2006 Last DW told me, a 'new' movement would cost $150... Link to comment Share on other sites More sharing options...
pitimany Posted June 2, 2006 Author Report Share Posted June 2, 2006 You've got a few choices: 1) Have it repaired. You will need a good watchmaker, and a budget of about $300-$400 each. Since necessary parts would not be available, this is not recommended. 2) Buy replacement movements. DW sells these (I believe they are about $100 each). As Ubi mentioned, there's no guarantee that the new movements won't develop some problems as well. 3) Buy VJ23's to replace the DW movements. Halley has hinted that this will work, but I don't think that anyone has actually completed this upgrade. You will need a new hand set as well. If this works, it's a very good solution. 4) Sell the two watches for parts, and use the funds towards a VJ72 based Daytona. Most expensive, but will leave you with the best rep. 1) no way 2) if no other (but now up for 3 mov) 3) Vj23 are hard to find. 4) Vj72 based, Who can source one of this ?. It makes more sense to me. Link to comment Share on other sites More sharing options...
slay Posted June 3, 2006 Report Share Posted June 3, 2006 Last DW told me, a 'new' movement would cost $150... pretty expensive for a shitty movement! does he ever comment his crappy movements?! i mean he's gotta find a solution! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now