Jump to content
When you buy through links on our site, we may earn an affiliate commission.
  • Current Donation Goals

Help with Ladies YM


Ironman

Recommended Posts

Hi All,

I had to make a new I.D because I couldn't remember my password from a couple years ago. Anyway I received to Ladies YM from Josh today and it looks real nice, but When you shake it a little to wind it there's something rattling inside, sounds like a little weight sliding back and forth in the case. I can get the second hand to move for 5-15 seconds but then it stops. Can't get it to move at all while wearing. I emailed him and am waiting reply. Is there anything I can to do to it?

Thanks

Edited by Ironman
Link to comment
Share on other sites

Try winding it manually by giving the crown 20-30 revolutions slowly. If the watch begins to run and continues then, indyberetta is correct. You could open the case and secure the rotor screw....problem solved. :D I hope that you can resolve this problem yourself rather than send it back to China which is a royal PIA.

Link to comment
Share on other sites

Hi, Thanks for the help. I hand winded it and it ran. So I got the back off using a half inch around by 6" piece of wood with duck tape on the end. As soon as it opened a little tiny piece of metal came out, I thought is was a broken piece, but after looking at through a magnifying glass I saw it was actually the screw. I had an optical screw driver but it was to thick so I put on the grinder and thined the end. Secured it and all is good. I hope it doesn't come lose again though.

Thanks for the quick replys, very nice of you.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...
Please Sign In or Sign Up