DemonSlayer Posted January 24, 2008 Report Share Posted January 24, 2008 Hi everyone, today I received 6 reps I had ordered last week (yes a haul I know ), as far as I know, they are spot on in terms of aesthetics and build. However 4 of them all had a common problem, either the screws on the bracelet were so badly designed that none of my screw drivers would fit properly into the 'notches' to allow me to turn them and therefore adjust the bracelets, or the some of the screws are so stubborn that they simply refuse to turn no matter how much torque I apply! The screws on my SMP are so bad that there simply aren't any notches at all, they are barely visible and there is no way any kind of screw driver will fit in there. The way it looks right now is that I will have to somehow file in 'notches' so they become deeper so that maybe with some luck, I can make them into proper screws and allow a screw driver to turn them. Has anyone here had these kind of problems with any of their reps, and if so, how did you solve this? Many thanks in advance, it is much appreciated Quote Link to comment Share on other sites More sharing options...
hyster Posted January 24, 2008 Report Share Posted January 24, 2008 The screws on my SMP are so bad that there simply aren't any notches at all Im not being smart here but are you sure they are not pins? For the screws, a tight fitting screwdriver makes all the difference, I've even put the bracelet in hot water to expand the metal slightly, sometimes works sometimes not. Don't round off the heads of the screws, stop before you do that and........ If you are really struggling, take them to a watch booth, you know the kind, in shopping centers and the like, just don't take them to an Authorized dealer. Quote Link to comment Share on other sites More sharing options...
DemonSlayer Posted January 24, 2008 Author Report Share Posted January 24, 2008 I am not actually 100% sure if they are screws or pins with screw heads. I can make out faint screw notches on the heads, as if they are really poorly designed screws I'll try tapping them out and see if I have any luck. I'm sure that the current SMP watches asian or ETA come with screws instead of pins in the bracelet don't they? Quote Link to comment Share on other sites More sharing options...
DuDro Posted January 24, 2008 Report Share Posted January 24, 2008 Careful with what you're doing...Try to take some detailed close-ups (no flash, longer exposure) of the sides of the links with the pins or screws. (We) can assist you better if we know what we're dealing with... Quote Link to comment Share on other sites More sharing options...
rek001 Posted January 24, 2008 Report Share Posted January 24, 2008 Those sound like the ends of split pins in the Seamaster, should be able to push them out. Quote Link to comment Share on other sites More sharing options...
DemonSlayer Posted January 24, 2008 Author Report Share Posted January 24, 2008 Photos are on the way Quote Link to comment Share on other sites More sharing options...
DemonSlayer Posted January 24, 2008 Author Report Share Posted January 24, 2008 I don't know if you can make that out, but thats the supposed 'screws' on the SMP bracelet. Theres a very faint screw head line where the screw driver is supposed to be placed, so faint that it might as well not be there because no screw driver can fit into that Heres the AP RO Chrono bracelet: The screw heads are badly made, the notches are deep but wonky so a flat head screw driver just simply doesn't lock in. Quote Link to comment Share on other sites More sharing options...
Guest carlsbadrolex Posted January 24, 2008 Report Share Posted January 24, 2008 Those appear to be split pins, not screws... Quote Link to comment Share on other sites More sharing options...
DemonSlayer Posted January 24, 2008 Author Report Share Posted January 24, 2008 Thanks, I was just thinking it might be screws because the head is certainly shaped like a screw, just very faint, not very noticeable. Do I tap the pins out on this side or on the opposite side? Quote Link to comment Share on other sites More sharing options...
hyster Posted January 25, 2008 Report Share Posted January 25, 2008 Thanks, I was just thinking it might be screws because the head is certainly shaped like a screw, just very faint, not very noticeable. Do I tap the pins out on this side or on the opposite side? I'm just off to bed DemonSlayer but you could have a look at By-tor's excellent guide to the Omega Seamaster, http://www.rwg.cc/members/index.php?showtopic=4509 Theres a bit about resizing the bracelet, it will give you a good idea of what you are doing. Just to repeat, if you are not sure, either ask or take it to a watch booth to be resized. Good luck. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.