omeega Posted February 13, 2008 Report Share Posted February 13, 2008 I recently purchased a retro GMT, and I'm pretty happy with it. The only real problems are the loose-clicking bezel, which sounds simple from what I've read, and the crown seems dangerously loose and off-center when I unscrew it. I'd like to replace the bezel insert and the crown/tube, but after searching I can't find anything that says definitively if these gen parts will fit with the Retro version. Any input would be greatly appreciated. Link to comment Share on other sites More sharing options...
w.genzo Posted February 13, 2008 Report Share Posted February 13, 2008 You'll have to shave a little bit the insert and to drill/tap the case to fit the new tube. They will work The bezel is an easy fix, I also did it, then I broke the movement but that's another story.. Link to comment Share on other sites More sharing options...
omeega Posted February 14, 2008 Author Report Share Posted February 14, 2008 You'll have to shave a little bit the insert and to drill/tap the case to fit the new tube. They will work The bezel is an easy fix, I also did it, then I broke the movement but that's another story.. Thanks for the info, I appreciate it. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now