purspeed Posted June 18, 2006 Report Posted June 18, 2006 The crown I have not is not very accurate, as I have the older model TW Classic. Thanks in advance.
Bazz Posted June 18, 2006 Report Posted June 18, 2006 The gen crown will not fit on a rep tube so you will have to change the tube also. The modern sub I have has a smaller diameter hole in the case for the tube so the hole would need to be drilled out and retaped, not sure if this is the case with all moderns though (my vintage one was a direct swap). Rember The Zigmeister saying some were just a swap but if I remember correctly they were not a TW case.
Tribal Posted June 18, 2006 Report Posted June 18, 2006 Yep, the TW-case has a tubehole diameter of 2,5mm. You must drill out to 2,8mm and than retap the hole... The Tap has a Diameter of 3mm x 0,25mm pitch.. I have done this on my MBW 16610 old style... Hope this helps... RG tribal
purspeed Posted June 18, 2006 Author Report Posted June 18, 2006 Very helpful Bazz/Tribal. Since I don't want the trouble of retapping, can you recommend a place to buy a good aftermarket crown that will drop in? (sort of like the aftermarket inserts)
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now