How to Fix Graham Chronofighter Wobbly Lever

[Samurai]

Got my Graham Chronofighter (Black face) from Joshua. Looks amazing.

As I have noticed with other members who have got this watch, the massive lever protecting the chrono is a bit loose / wobbly.

Have not been able to figure out a way to fix this .... am not a techie....so ideally an idiot-proof way of doing this will be great :-)

Would appreciate any help forthcoming on this.

Cheers

[lanikai]

Got my Graham Chronofighter (Black face) from Joshua. Looks amazing.

As I have noticed with other members who have got this watch, the massive lever protecting the chrono is a bit loose / wobbly.

Have not been able to figure out a way to fix this .... am not a techie....so ideally an idiot-proof way of doing this will be great :-)

Would appreciate any help forthcoming on this.

Cheers

the allen screws seem to be 'star' allens.. try tightening these first... be very careful the heads can be disfigured easily on these.. you will need two allens and remember like bolts ... it is not how hard you turn them but the pressure you apply.. steady .... loosen them first then tighten... and look at the thread below... find what I did to mine to tighten it.. just gentle pressure with a jewelers pliers.. and keep in mind that once it is on your wrist it will not wobble so you do not need to have it extrememy locked down.. as it rests on your forearm

good luck

http://www.rwg.cc/members/index.php?showtopic=67030

i removed 80 percent of the looseness by compresing the lever with a jewelers pliers not to bend it..just light pressure on the arms of the lever,..(quote from the above thread)

[Samurai]

Thanks Lanikai. Will try it out!