adctroj Posted March 21, 2008 Report Share Posted March 21, 2008 I have a decent watch winder... Set to rotate 33 seconds every 12 minutes. My question is this. I have a Breitling Evo Chrono, which stays working with no issue, I have three ETA - 2836-2 movements, which are working fine. Then i have one Asian 21J movement, which keeps stopping! Was wondering if three was something pathetically stupid that i might be doing. Right now i am trying to run it counter-clockwise, see if that does the trick. Any suggestions would be greatly appreciated. Andy Link to comment Share on other sites More sharing options...
Ztech Posted March 21, 2008 Report Share Posted March 21, 2008 I dunno if this will, but on some watches the angle of the winder is important. I mostly have larger sized dive watches and have found that on some winders the shere size of the watch and the angle of the winder plate won't allow for a complete rotation of the winding mechanism. At first, I thought there was something wrong with my watch. I only learned it was the winder when I tried multiple watches on the winder. Only to find they were not wound after a few days on the winder. Hope that helps. Good luck. Link to comment Share on other sites More sharing options...
Geeeyejo Posted March 21, 2008 Report Share Posted March 21, 2008 Guess it depends upon the watch - I have some that wind well on the winder others that will not at all... Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now