44mm Ti

[PAMman]

Many of our dealers are indicating that Ti reps will soon not be available anymore. however there are a number of 'Homage' builders who continue to offer an excellent looking case with a better crown than we seem to have been getting. These are available on a number of forums TZ, TZ-UK etc. For example;

http://www.tz-uk.com/forum/viewtopic.php?f=3&t=43381

Any thoughts?

[scoobs1971]

Looks interesting. Thnx for the link!

[fishgodeep]

PAMMan...these are the same products available on flebay from seller helenarou...

The Ti case and crown look much better in these photos on TZ than on the Bay..

If it's the same as the Steel case set I purchased a few comments -

-Short Lugs and no strap dimple on inside of case - accurate A ?

-Mineral crystal ?? - Mine is I'm sure

-The SS crown is rubbish looking - teeth are flat - this Ti one looks better - but similar

-Tube is ridculously thin and a new one is required to fit any other crown

-The CG lever is symetrical between the guard - not thinner top portion of the CG - but these can be re-worked.

This set could be a good starting point for an 036 or 040?

[peepshow]

I have talked to DSN about this on a couple of different occasions, he assures me that he has no intention of discontinuing his Ti cased offerings...