narikaa Posted March 27, 2008 Report Share Posted March 27, 2008 Not a new subject I know But having been in correspondence with several people who have made a complete 'dogs dinner' of doing this heres a few things to note. DONT USE SUPERGLUE! Whatever you do use be careful in the application as it can so easily get on the crystal &/or down under the bezel (huge fun!!). Recomendation - Run (dont walk) & buy yourself a tube of this: Dries clear (use to bed crystals, replace CZs, etc etc etc) Very inexpensive But most importantly when you pull the cap off it exposes the dispenser.... a hypodermic needle from the front of the tube!! Perfect minimal application right on the spot. No mixing no faffing about with cocktail sticks Easy Peasey! . Link to comment Share on other sites More sharing options...
Homer Posted March 27, 2008 Report Share Posted March 27, 2008 thanks for that pal Link to comment Share on other sites More sharing options...
stilty Posted March 27, 2008 Report Share Posted March 27, 2008 Great stuff! Just keep in mind it tacks up fairly quickly, so set your part right away. And whatever you do once you install your part, don't try to reset it, otherwise you will have to clean all the glue off both parts and try again. At least that is my experience. If you need more time to set something, use a slow set epoxy. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now