UncleJay Posted April 7, 2008 Report Share Posted April 7, 2008 I just received this PAM0082 from Matt. He clearly stated there was a scratch on the bezel and showed it in photos. I thought it the perfect chance to show those who don't already know the power of an ink eraser. I posted instructions before and had pic requests, so here they are. Quote Link to comment Share on other sites More sharing options...
JoJo35 Posted April 8, 2008 Report Share Posted April 8, 2008 great tip Jay, thanks! Quote Link to comment Share on other sites More sharing options...
vootzilla Posted April 8, 2008 Report Share Posted April 8, 2008 just affect on the Ti or can be applied on stainless steel too? like using cape cod? :-) Quote Link to comment Share on other sites More sharing options...
capice Posted April 8, 2008 Report Share Posted April 8, 2008 great tip Uncle Jay Quote Link to comment Share on other sites More sharing options...
UncleJay Posted April 8, 2008 Author Report Share Posted April 8, 2008 just affect on the Ti or can be applied on stainless steel too? like using cape cod? :-) I've used this method on satin finish steel as well. On finishes as found on the case side you'll need to use the Scotch-Brite pad. This works on these finishes on any type of metal. Quote Link to comment Share on other sites More sharing options...
vootzilla Posted April 8, 2008 Report Share Posted April 8, 2008 Thanks uncle!! Quote Link to comment Share on other sites More sharing options...
old skool Posted April 8, 2008 Report Share Posted April 8, 2008 Nice. An eraser for ink you say? Quote Link to comment Share on other sites More sharing options...
UncleJay Posted April 9, 2008 Author Report Share Posted April 9, 2008 Nice. An eraser for ink you say? Yes Sir, I actually used the one in the pic. Quote Link to comment Share on other sites More sharing options...
milsub5517 Posted April 9, 2008 Report Share Posted April 9, 2008 Ti is very soft, thats why it picks up scratches easily. for SS you'd need something harder. Great tip though! J, are you planning to do a lume job on this 82? do you know what color lume gen has? Quote Link to comment Share on other sites More sharing options...
DuDro Posted April 9, 2008 Report Share Posted April 9, 2008 Very neat trick! I'll be applying this to my ICW AMG Ingeniuer and PAM036! Quote Link to comment Share on other sites More sharing options...
Guest avitt Posted April 9, 2008 Report Share Posted April 9, 2008 Here's the one I use: 59 cents, at Office Depot Quote Link to comment Share on other sites More sharing options...
ta8088 Posted April 11, 2008 Report Share Posted April 11, 2008 Neat trick! Thanks for sharing it. Now that I have a couple Ti watches it might come in handy. Quote Link to comment Share on other sites More sharing options...
fishgodeep Posted April 11, 2008 Report Share Posted April 11, 2008 Here's the one I use: 59 cents, at Office Depot Great Tip Jay ...thanks Now If I was a business man ...I'd put these in a nice box with a cloth, brand them up and sell them as a "Refinishing Device for Prestige Watches" - $20 should do it for starters Hence I am not a business man ....just a mere consumer muppet who'd probably have paid $20 if it wasn't for the advice on this board... Cheers Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.