swissaddict Posted May 5, 2008 Report Posted May 5, 2008 One of my 2824's was running 12 seconds fast. No big deal, but I was greasing the watch's seals anyway so I figured I'd slow the movement a bit to get it closer to spot-on time keeping. I've done this before. No big deal, right? Well the damn screw came loose! I was using the proper screwdriver size, I was very gentle, but it came loose and popped right out. Now I can't get it to stay back in its place. Clearly I'm no watchsmith... Help?
FxrAndy Posted May 5, 2008 Report Posted May 5, 2008 You could just leave it out and adjust by moving the y that is left with a bit of peg wood if needed, it is not essential to the running of the movement
swissaddict Posted May 5, 2008 Author Report Posted May 5, 2008 You could just leave it out and adjust by moving the y that is left with a bit of peg wood if needed, it is not essential to the running of the movement Really?... That would be a huge relief for me. I don't know why I assumed it needed to be replaced properly. I guess I'll leave it out, then! Thank you so much!!
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now