swissaddict Posted May 5, 2008 Report Share Posted May 5, 2008 One of my 2824's was running 12 seconds fast. No big deal, but I was greasing the watch's seals anyway so I figured I'd slow the movement a bit to get it closer to spot-on time keeping. I've done this before. No big deal, right? Well the damn screw came loose! I was using the proper screwdriver size, I was very gentle, but it came loose and popped right out. Now I can't get it to stay back in its place. Clearly I'm no watchsmith... Help? Quote Link to comment Share on other sites More sharing options...
FxrAndy Posted May 5, 2008 Report Share Posted May 5, 2008 You could just leave it out and adjust by moving the y that is left with a bit of peg wood if needed, it is not essential to the running of the movement Quote Link to comment Share on other sites More sharing options...
swissaddict Posted May 5, 2008 Author Report Share Posted May 5, 2008 You could just leave it out and adjust by moving the y that is left with a bit of peg wood if needed, it is not essential to the running of the movement Really?... That would be a huge relief for me. I don't know why I assumed it needed to be replaced properly. I guess I'll leave it out, then! Thank you so much!! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.