poopypants Posted June 10, 2008 Report Share Posted June 10, 2008 PAM196, whats the right way to disassemble the crown guard assembly? Link to comment Share on other sites More sharing options...
dluddy Posted June 10, 2008 Report Share Posted June 10, 2008 Unscrew it from the case To get the lever pin out the best method I know of is to use a bracelet pin removal tool Link to comment Share on other sites More sharing options...
Guest carlsbadrolex Posted June 10, 2008 Report Share Posted June 10, 2008 I have divoted a pin using that exact tool... the pin used to push out the cg pin is too small and pointed. That and I think the metal in the cg pins is REALLY soft. It didnt make alot of difference, because I sanded it down flush after putting it back in anyway... but if you dont intend to do that, this is a consideration. Link to comment Share on other sites More sharing options...
mjmurphy926 Posted June 10, 2008 Report Share Posted June 10, 2008 Do you push it out from the bottom of the CG up, or from the top of the CG down? Or does it matter? Link to comment Share on other sites More sharing options...
jmt Posted June 10, 2008 Report Share Posted June 10, 2008 I have divoted a pin using that exact tool... the pin used to push out the cg pin is too small and pointed. That and I think the metal in the cg pins is REALLY soft. It didnt make alot of difference, because I sanded it down flush after putting it back in anyway... but if you dont intend to do that, this is a consideration. I did this too. Then I started using a toothpick. That worked great. Link to comment Share on other sites More sharing options...
sssurfer Posted June 10, 2008 Report Share Posted June 10, 2008 Do you push it out from the bottom of the CG up, or from the top of the CG down? Or does it matter? It does matter. Most pins come with an end larger than the other end. If one pin end / hole looks smaller than the other one, push from that end. Else push gently from the CG down. If the pin does not move at all, then try gently as well from the CG up. If it does not move yet, then push again from the down by applying a little more pressure, and so on. Odds are that the pin will come out from down to up, but not necessarily. Link to comment Share on other sites More sharing options...
mjmurphy926 Posted June 10, 2008 Report Share Posted June 10, 2008 It does matter. Most pins come with an end larger than the other end. If one pin end / hole looks smaller than the other one, push from that end. Else push gently from the CG down. If the pin does not move at all, then try gently as well from the CG up. If it does not move yet, then push again from the down by applying a little more pressure, and so on. Odds are that the pin will come out from down to up, but not necessarily. Thank you Sir. Link to comment Share on other sites More sharing options...
poopypants Posted June 11, 2008 Author Report Share Posted June 11, 2008 (edited) thanks guys! toothpick idea is not working on this one... might have to buy another pin remover... this sucker is in there! this is the only thing i need to get apart for the project... PP Edited June 11, 2008 by poopypants Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now