thread size on crown tube

[cschenone]

Anyone know what the thread size is (see picture). My gen like tube snaped off flush with the case and I am going to have to drill and tap new threads.

-Chris

Edited July 16, 2008 by cschenone

[freddy333]

Anyone know what the thread size is (see picture). My gen like tube snaped off flush with the case and I am going to have to drill and tap new threads.

Unless you (incorrectly) glued the tube into the case, you should be able to remove it fairly easily by wedging a small, round hobby file into the hole & then unscrewing the tube by turning the file.

[pugliesotto]

Anyone know what the thread size is (see picture). My gen like tube snaped off flush with the case and I am going to have to drill and tap new threads.

according to this page

http://www.horologist.com/rolex_crown.htm

the correct size is 3,00 x 3,00... but seems that it's difficult to find a tap with that size.

If you find it let me know

Edited July 16, 2008 by pugliesotto

[cschenone]

Unless you (incorrectly) glued the tube into the case, you should be able to remove it fairly easily by wedging a small, round hobby file into the hole & then unscrewing the tube by turning the file.

I've tried, but I just seam to be tearing out the inner metal. The tube was already installed with the watch so who knows what they did.

[cschenone]

according to this page

http://www.horologist.com/rolex_crown.htm

the correct size is 3,00 x 3,00... but seems that it's difficult to find a tap with that size.

If you find it let me know

Thank you. I believe that the smallest tap in my set is a 3x3. I bought it at a hardware store.

Thank you.

Chris

[freddy333]

Just get 1 of these Rolex tube tap tools (it is made to fit Triplock tubes)

(click the pic)

[pugliesotto]

Just get 1 of these Rolex tube tap tools (it is made to fit Triplock tubes)

(click the pic)

thanks for the info...anyway :

that tap is M3 x 0.35 (zoom photo).. on ebay you can find it at 4