jitai Posted July 24, 2008 Report Share Posted July 24, 2008 (edited) This is my next long waited project. The PAM 24A Have been trying to gather the "right" parts over a looooong time. Just dropped in a lello's date wheel. So, my question now. Does the rep cyclop mag looks ok with the bolder lello's date font? I got a chieftang cyclop coming. Should I remove the rep cyclop and replace with cheiftang's? Should I use the chieftang's cyclop or the rep cyclop is already good enough? Experts. Please help. Edited July 24, 2008 by jitai Link to comment Share on other sites More sharing options...
HauteHippie Posted July 24, 2008 Report Share Posted July 24, 2008 That might be a sandwich crystal which would preclude the use of my cyclops anyhow.... Someone here will know for sure. Link to comment Share on other sites More sharing options...
jitai Posted July 24, 2008 Author Report Share Posted July 24, 2008 That might be a sandwich crystal which would preclude the use of my cyclops anyhow.... Someone here will know for sure. Hi CT, I don't really get you. What is the meaning of preclude the use of your cyclop? Thanks Link to comment Share on other sites More sharing options...
jitai Posted July 24, 2008 Author Report Share Posted July 24, 2008 Thanks for your comment CT. Anyone knows if chieftang's cyclop can be used for my 24A? Kruzer00, can you help? Thanks guys Link to comment Share on other sites More sharing options...
RWG Technical Posted July 24, 2008 Report Share Posted July 24, 2008 Sandwich crystal, it can't be done. RG Link to comment Share on other sites More sharing options...
sssurfer Posted July 24, 2008 Report Share Posted July 24, 2008 Sandwich crystal, it can't be done. +1. Lello has once been able to disassemble and reassemble a sandwich crystal w/ embedded cyclops (while I completely ruined one), exactly on a 24. But he used exactly the same cyclops as before. If you try and use an even slightly different diameter cyclops, it will either not fit into the hole (if larger), or you are going to end up with an unbearable double contour around the cyclops (if smaller). Also, IMO, your rep cyclops with the Lello DW looks excellent. Link to comment Share on other sites More sharing options...
slai Posted July 24, 2008 Report Share Posted July 24, 2008 Do all the sub reps have a sammich crystal? In particular, the 87? Link to comment Share on other sites More sharing options...
dluddy Posted July 24, 2008 Report Share Posted July 24, 2008 Definately a Sandwich crystal so aftermarket cyclops is nearly impossible... Also not that you have a Hashmarked bezel which came out on the "D" series and above 024 Submersibles.... The "A" series has a non-hashed polished Bezel.... Link to comment Share on other sites More sharing options...
Watchmeister Posted July 24, 2008 Report Share Posted July 24, 2008 It depends which model PAM 24 you have. Some did come as standard crystals and I do love Chief's cyclops for certain models. My solution for the state of the art 24A is gen crown and Jimmy CG on the case and Lello datewheel plus sandwich crystal found on the newer ones.: And if you have any doubts - Rep versus gen: Link to comment Share on other sites More sharing options...
jitai Posted July 25, 2008 Author Report Share Posted July 25, 2008 Thanks again guys. I owned some pam reps with sandwiched cyclop before. The one on mine is a one piece cyclop. Another question for Kruzer, Is it possible to polish off the harshmarked bezel ? Thanks for your help. Link to comment Share on other sites More sharing options...
HauteHippie Posted July 25, 2008 Report Share Posted July 25, 2008 Thanks again guys. I owned some pam reps with sandwiched cyclop before. The one on mine is a one piece cyclop. Another question for Kruzer, Is it possible to polish off the harshmarked bezel ? Thanks for your help. It looks like they're different models? Not a sub expert, but the dials are a different color and the gen has the metal borders around the hour markers, in addition to the difference in hash marks on the bezel.... Link to comment Share on other sites More sharing options...
jitai Posted July 25, 2008 Author Report Share Posted July 25, 2008 Hi Kruzer and dluddy, Thanks for all the info and help given. Since mine comes with the the brushed harshmarked bezel, I will go for PAM24 "D" series. BTW, what does the BB numbers stand for? Thanks again guys Link to comment Share on other sites More sharing options...
dluddy Posted July 25, 2008 Report Share Posted July 25, 2008 Here is a Table of BB numbers one of our esteemed members assembled. PAM_table_v5.0.xls The BB number is comprised of the Year manufactured, lot size and serial number Link to comment Share on other sites More sharing options...
sssurfer Posted July 25, 2008 Report Share Posted July 25, 2008 Dluddy, I feel honoured from your reference. Thanks! Btw, I am constatntly preparing the next release of that table. jitay... even if this stays a little obscure to me... the BB number (or, on a few PAM models, PB number) uniquely identifies a PAM watch, almost like the serial number (e.g. 0937/2000). Differently from the OP number, that identifies only the case model so it is not unique. AFAIK, the difference between BB numbers and serial nubers is subtle. Imagine that Officine Panerai wants to make 2000 pieces of a given PAM XXX model on year 2008. Imagine that after making 500 pieces they suspend the production of that given model to make, e.g., 300 pieces of a different PAM YYY model, to then come back to produce the remaining 1500 pieces of PAM XXX. The last PAM XXX model made before the interrupt has serial number 0500/2000 and -- let's assume -- BB number BB 100400. When they come back to produce the PAM XXX again, the first watch of the new PAM XXX run gets serial number 0501/2000 and BB number BB 100701 (100701 = 10400 + 300 + 1). In other words, the serial number is unique only with respect to a given model and series, while the BB number is unique over ALL the models and series, it really identifies one single watch. Link to comment Share on other sites More sharing options...
vootzilla Posted July 25, 2008 Report Share Posted July 25, 2008 Wow... the 24 Sub is tempting!! I'm considering sourcing one of those.... especially the one with polished bezel... is it 24A??? Im so confused with the model but I like the polished bezel one very much!! ;-) Link to comment Share on other sites More sharing options...
sssurfer Posted July 25, 2008 Report Share Posted July 25, 2008 the one with polished bezel... is it 24A??? Yes, it is 24A, and some 24B -- all those with the OP 6527 case. All other OP numbers, i.e. the remaining of B series and all C+ series, have brushed bezel. Link to comment Share on other sites More sharing options...
vootzilla Posted July 26, 2008 Report Share Posted July 26, 2008 Yes, it is 24A, and some 24B -- all those with the OP 6527 case. All other OP numbers, i.e. the remaining of B series and all C+ series, have brushed bezel. THanks, man! I'll hunt for it! Link to comment Share on other sites More sharing options...
Watchmeister Posted July 26, 2008 Report Share Posted July 26, 2008 Unfortunately all the 24A reps I have seen have a brushed bezel so it will require polishing. What I should add is that this particular rep has the best 12 click bezel action I have ever felt on a PAM rep. It actually matches the gen perfectly. But to make a 24 "perfect" - ) you will have to remove the hour marker surrounds and relume to tritium. In truth the 24 D is going to be easier. And if you can ever source a case back for a later 24 (j or later) that model actually comes with a lumed dial and the surrounds. Link to comment Share on other sites More sharing options...
sssurfer Posted July 26, 2008 Report Share Posted July 26, 2008 Oh well, the good news is that CapeCod cloths make miracles in polishing brushed SS. Link to comment Share on other sites More sharing options...
frogfalls Posted November 2, 2008 Report Share Posted November 2, 2008 Do all the sub reps have a sammich crystal? In particular, the 87? Hi all Does anyone explain me what a sandwich crystal is and how can I know if my rep has this kind of crystal and not the standar one? Thanks for your help Link to comment Share on other sites More sharing options...
Watchmeister Posted November 2, 2008 Report Share Posted November 2, 2008 Sandwich crystal is as it sounds. It is a pair of crystals glued together. The lower layer has a hole drilled into it to allow for the cyclops to be glued to the bottom of the top crystal. The cyclops is attached to the top crystal but sticks thru the hole on the second crystal allowing more height (and better magnification) above the datewheel. That is how the gen crystal is constructed. Link to comment Share on other sites More sharing options...
frogfalls Posted November 2, 2008 Report Share Posted November 2, 2008 Sandwich crystal is as it sounds. It is a pair of crystals glued together. The lower layer has a hole drilled into it to allow for the cyclops to be glued to the bottom of the top crystal. The cyclops is attached to the top crystal but sticks thru the hole on the second crystal allowing more height (and better magnification) above the datewheel. That is how the gen crystal is constructed. does it means that it is a improve over the standar crystals? Thanks for your support kruzer Link to comment Share on other sites More sharing options...
sssurfer Posted November 2, 2008 Report Share Posted November 2, 2008 does it means that it is a improve over the standar crystals? Definitely. You can find that crystal & cyclops on most submersibles, all recent DSN auto PAMs, and unexpectedly even on a few low-cost PAM reps like Joshua's 1st generation Asian 104. Unfortunately, sandwich crystal / recessed cyclops makes replacing the cyclops almost impossible in case you want to do that, as kruzer wanted. Link to comment Share on other sites More sharing options...
frogfalls Posted November 2, 2008 Report Share Posted November 2, 2008 Definitely. You can find that crystal & cyclops on most submersibles, all recent DSN auto PAMs, and unexpectedly even on a few low-cost PAM reps like Joshua's 1st generation Asian 104. Unfortunately, sandwich crystal / recessed cyclops makes replacing the cyclops almost impossible in case you want to do that, as kruzer wanted. Thanks for your help sssufer is there anyway to know what type of crystal ( sandwich or standar) the watch has, without remove it? Link to comment Share on other sites More sharing options...
Watchmeister Posted November 2, 2008 Report Share Posted November 2, 2008 Very difficult to tell without removing the crystal. I suppose if you were intimately familiar with the improved magnification you could tell. And yes it is superior. That is how the gen crystal is built. All things being equal it allows you to either improve overall magnification by raising the height of the cylops from the date or maintain the same magnification as a one piece crystal using a lower magnification cyclops for better clarity. I am simplifying this but you get the idea. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now