scoobs1971 Posted August 23, 2008 Report Share Posted August 23, 2008 I have re-assembled the keyless works over and over again. Still the date quicksetting doesn't work. Winding works as does time setting. It's like the stem doesn't push the sliding pinion far enough to reach the setting wheel and engage with the date intermediate wheel. Hope somebody can tell me what I apparently don't see.... Link to comment Share on other sites More sharing options...
RWG Technical Posted August 23, 2008 Report Share Posted August 23, 2008 It can only be one of two things: 1. The quickset gear for the calendar is not free to slide towards the datewheel when you turn the crown (it moves laterally in and out of engagement with the calendar) 2. The quickset gear is defective. If it winds and sets the time, then everything else has to be correct. If you turn the crown in the date adjust setting, what does the calendar quick set gear do? Turning CW and CCW what happens? The answer to these questions will show you the problem... RG Link to comment Share on other sites More sharing options...
scoobs1971 Posted August 23, 2008 Author Report Share Posted August 23, 2008 Thnx R! I'll look again tomorrow. All I can see now is that the date adjust setting doesn't do anything that slipping the stem both CW and CCW and no setting wheel moving at all. Link to comment Share on other sites More sharing options...
drop Posted August 23, 2008 Report Share Posted August 23, 2008 I'm sure you've done it already, but double-check to be sure all the gears in your works are facing the correct drection, the pieces are all in their proper locations. Sometimes when screwing things back together some of the parts slide around... Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now