ryaku Posted July 13, 2006 Report Share Posted July 13, 2006 Hi guys, soon i'll have a second-hand IWC stainless steel (not titanium) with one chronograph pusher missing. Does anyone here has an extra pusher to sell me? I'm not very confident, perhaps i'd better ask some dealer to source one for me. Thanks for reading Link to comment Share on other sites More sharing options...
ryaku Posted July 20, 2006 Author Report Share Posted July 20, 2006 Hi guys, soon i'll have a second-hand IWC stainless steel (not titanium) with one chronograph pusher missing. Does anyone here has an extra pusher to sell me? I'm not very confident, perhaps i'd better ask some dealer to source one for me. Thanks for reading still looking for.. Link to comment Share on other sites More sharing options...
thomasng Posted July 20, 2006 Report Share Posted July 20, 2006 Come on someone..... help this guy out. Link to comment Share on other sites More sharing options...
jkerouac Posted July 20, 2006 Report Share Posted July 20, 2006 One of my GST pushers came off several times. Fortunately I found it each time and finally was able to secure it properly. Based on threads here and elsewhere a lot of GSTs arrived with loose pushers, so I would guess that our dealers have fielded more than one request for replacement parts. That is you best bet. You might also check with a repair shop. These pushers seem fairly generic in design, and a generic replacement might be possible. Of course you'd probably have to replace both in order for them to match. Good luck. Link to comment Share on other sites More sharing options...
krustybrand Posted July 20, 2006 Report Share Posted July 20, 2006 I had a very large parts supplier go through their pusher selection with me trying to find a match for the GST. No luck. Best bet is one of our dealers. Link to comment Share on other sites More sharing options...
ryaku Posted July 20, 2006 Author Report Share Posted July 20, 2006 I had a very large parts supplier go through their pusher selection with me trying to find a match for the GST. No luck. Best bet is one of our dealers. Thanks for tips lads, i had no luck with our dealers for now, 3 of 'em (i asked dealers i have bought from) told me they can't get it. Link to comment Share on other sites More sharing options...
Richard Tracy Posted July 20, 2006 Report Share Posted July 20, 2006 I have yet to experience this .. and keeping my fingers crossed... How about some prevention advice... Is this an un-winding problem ? Or is it' breaking off ? Link to comment Share on other sites More sharing options...
krustybrand Posted July 20, 2006 Report Share Posted July 20, 2006 The button simply unscrews itself, Richard. To prevent, you need to remove the movement, then take the buttons off and use a tiny bit of blue loctite to reassemble. Link to comment Share on other sites More sharing options...
Richard Tracy Posted July 21, 2006 Report Share Posted July 21, 2006 The button simply unscrews itself, Richard. To prevent, you need to remove the movement, then take the buttons off and use a tiny bit of blue loctite to reassemble. Thanks KB... helpful as always.... Link to comment Share on other sites More sharing options...
ryaku Posted July 22, 2006 Author Report Share Posted July 22, 2006 any tip is very welcome Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now