82KUBA Posted October 17, 2008 Report Share Posted October 17, 2008 hows it looking ???? Link to comment Share on other sites More sharing options...
dluddy Posted October 17, 2008 Report Share Posted October 17, 2008 Looking good Link to comment Share on other sites More sharing options...
ubiquitous Posted October 17, 2008 Report Share Posted October 17, 2008 DSN PVD and some more Cape Cod... Pics don't really reflect the true finish; it's more of a gun metal grey Link to comment Share on other sites More sharing options...
bwhitesox Posted October 17, 2008 Report Share Posted October 17, 2008 So the PVD doesn't wear off if you polish it too much?? Link to comment Share on other sites More sharing options...
ubiquitous Posted October 17, 2008 Report Share Posted October 17, 2008 The CC tones the PVD down a bit... A result of wearing off gradually methinks. It really adds a nice finish to the DSN PVD in general- Takes that chalky finish off and adds a bit of a shine. Not sure what would happen if all of the PVD coating were to be polished off, though. That might be interesting... Link to comment Share on other sites More sharing options...
Guest avitt Posted October 17, 2008 Report Share Posted October 17, 2008 I've got a theory that the Cape Cod isn't actually removing any of the PVD. When you think about it, unless the cloth is impregnated with diamond powder, it's probably not abrasive enough to touch the coating (which is several times harder than stainless steel). I think, rather, that it is oiling the surface, to give is a slightly darker and shinier appearance. Link to comment Share on other sites More sharing options...
ubiquitous Posted October 17, 2008 Report Share Posted October 17, 2008 Hmmmm... On my case, the color has gradually become lighter? Link to comment Share on other sites More sharing options...
dluddy Posted October 17, 2008 Report Share Posted October 17, 2008 Same on mine... Link to comment Share on other sites More sharing options...
Guest avitt Posted October 17, 2008 Report Share Posted October 17, 2008 Hmmm Then I take it back. I can't explain why it would be lighter. Link to comment Share on other sites More sharing options...
82KUBA Posted October 17, 2008 Author Report Share Posted October 17, 2008 so should i keep going ??? Link to comment Share on other sites More sharing options...
turboGUATE Posted October 17, 2008 Report Share Posted October 17, 2008 I'd give it a try and keep going but so far, so good! Link to comment Share on other sites More sharing options...
MADRED7 Posted October 17, 2008 Report Share Posted October 17, 2008 I polished 2 of my DSN watches (a 202A and 203A) and the result is very nice. The PVD coating is polished off.....yes you can get a PVD watch back to its original ss color (I have done it before)! The "older" DSN PVD coating is a bit better to get it to real vintage look, because the color was more dark black and the end result is a very dark but shiny grey....the new DSN PVD is grey from the start and will only get lighter. In edition I polished the case with a dremel and polishing wax.....that gives it an even better shine. Anyway, you cannot picture the results.....every pic I took looked different due to angle, light and distance! AND PLEASE NOTE: You can easely go tooo far with cape cod and have the PVD come off where you want it to stay Theo Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now