111h Hand wind issue

[P8B]

Hi All,

I have a manual wind 111h from deltick. It had not been worn for like a 20-30 days so i picked it up this morning to wind it and i cant, when i turn the crown it changes time, i tried every position but it does not do the trick.

Has anyone had this problem? or can someone tell me how to set this right please?

Thanks

[babola]

Could be as easy as keyless works screw that gotten loosened up (unscrewed from the clutch on the dial side), or simply needs to be re-seated properly.

While this would be reasonably easy thing to check and rectify for a person that's done some basic mov't tinkering in the past, I'm not sure how handy you are with the watch mov'ts in general, so it may be a good idea to take it down to your watchmaker or jewelerly store to have a look at it.

[FxrAndy]

I would say that

[P8B]

Guys you wont believe this but with no watch tinkering experience whatsoever never having removed a caseback even i was able to fix this!!

Thanks to our very own Deltick of course who supplied me with a picture of exactly what to so and in a few minutes... Boom its working again!

[babola]

Glad it worked out for you in the end :-)

[FxrAndy]

So what exactly was it?

[P8B]

So what exactly was it?

All i needed to do was to remove the back and tighten a small screw that holds the crown in (pic attached)

Im writing a step by step of what i did for other noobs who might have a similar issue...