PAM 111H CG fix

[Oyster]

Hi folks,

Thought I'd share my experience on the process of CG pin fix.

Recipes:

1) Sand paper (150 Grit - Fine)

For sanding down the inner guard (they are very rough), also to get a tighter closure for the crown/lever.

2) Crystal protective film (thick) that comes with most watches

A small piece to be inserted together with the pin.

Note: The finishing of the CG, non visible/hidden area are horrendous. My next task is to smoothen out those areas and change all screws.

Photos as follows...

Cheers,

Rob

[Oyster]

One more shot. Different shade.

Cheers

[Toadtorrent]

Does sticking the film around the pin help stop the flop??

[Oyster]

Hi Toad, Yea, the film works pretty good. Winding without popping out the lever works too.

Does sticking the film around the pin help stop the flop??