Oyster Posted December 30, 2008 Report Share Posted December 30, 2008 Hi folks, Thought I'd share my experience on the process of CG pin fix. Recipes: 1) Sand paper (150 Grit - Fine) For sanding down the inner guard (they are very rough), also to get a tighter closure for the crown/lever. 2) Crystal protective film (thick) that comes with most watches A small piece to be inserted together with the pin. Note: The finishing of the CG, non visible/hidden area are horrendous. My next task is to smoothen out those areas and change all screws. Photos as follows... Cheers, Rob Quote Link to comment Share on other sites More sharing options...
Oyster Posted December 30, 2008 Author Report Share Posted December 30, 2008 One more shot. Different shade. Cheers Quote Link to comment Share on other sites More sharing options...
Toadtorrent Posted December 30, 2008 Report Share Posted December 30, 2008 Does sticking the film around the pin help stop the flop?? Quote Link to comment Share on other sites More sharing options...
Oyster Posted December 31, 2008 Author Report Share Posted December 31, 2008 Hi Toad, Yea, the film works pretty good. Winding without popping out the lever works too. Does sticking the film around the pin help stop the flop?? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.