alw Posted February 22, 2009 Report Share Posted February 22, 2009 Hi, I have a new 3717 with A7750. The "problem" is that I cannot screw the crown down without engaging the wind mechanism, and I really don Quote Link to comment Share on other sites More sharing options...
RWG Technical Posted February 22, 2009 Report Share Posted February 22, 2009 Your crown stem clutch is defective or the stem is cut too short. The stem should disengage from the crown when you press it in to screw it down, but even if yours is not disengaging, the amount of winding your doing to the movement while screwing the crown is nothing to worry about. You will cause more damage by leaving the crown unscrewed and allowing dirt and moisture to enter the case. RG Quote Link to comment Share on other sites More sharing options...
alw Posted February 22, 2009 Author Report Share Posted February 22, 2009 Damn, thanks for the advice. This one just came back from TomHighway because of other issues...I guess he didn Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.