shkolnik Posted June 15, 2009 Report Share Posted June 15, 2009 The help is necessary to me. I wish to get gen bezel for BCE. Whether I need to know precisely I can to replace it in rep BCE V2. If somebody knows as it help to make to me please Link to comment Share on other sites More sharing options...
Rolexman Posted June 15, 2009 Report Share Posted June 15, 2009 There are some people who fitted a gen bezel on the V2 but you will most definitely ruin the rep bezel. You have to know that the rep bezel is pressure fitted (non-gen like). Instead of simply loosening the screws on the gen, you need to force the rep one off (scews are for show). In most cases you will end up bendig the rep bezel beyond repair during that process.... Link to comment Share on other sites More sharing options...
chillininla Posted June 16, 2009 Report Share Posted June 16, 2009 Yes, It can Definitely be done! I have a gen bezel on my BCE and was able to remove the rep bezel without damaging it. You only have to remover the screws on the 12, 3, 6 and 9'o'clock tabs, the rest of the screws are just for looks. If you don't have a case opener like me, take a small but wide flat-head screw driver and sharpen the tip by sanding so it will fit in the small gap and carefully pry it off Heating up the case with a hairdryer helps expand the bezel and makes it easier. Follow Sconeheads instructions here: HERE Good luck, it take a bit of effort but its well worth it. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now