PilotI
-
Posts
137 -
Joined
-
Last visited
-
Days Won
1
Posts posted by PilotI
-
-
Screw should touch the regulator dagger Hard to tell on my phone if this one does That is an easy fix but would be even better if longer screw was used
The screw is definately not touching the regulator.
they've made good progress with the incabloc but there is still a long way to go to make the movement look like the gen. In fact i think they'll never get it right
-
looks good but when will they finally start using a longer regulator screw the one on the pic looks horrible.
-
Jomashop.... i had a very bad experience with the after sales. Never again.
-
I agree one of the nicest watches i've owned.
Here's mine
- 1
-
just reported on ebay as a fake. what a [censored].
-
-
I have them (mostly since one is a Franken genstein)
Franken fiddy , gen 296 and gen 087G if we are talking more contemporary Pams I guess G series is contemporary
My genstein 003A can be the old timer bridesmade
any pics of that franken 127? I'm trying to build one as we speak.
-
Just a quick update my sub is making slow but steady progress.
I've ordered the new V3 bracelet and V2 DWO from TC.
I also managed to install a gen pearl in the TC LV bezel. it looks very nice altough the photo does not do justice at all:
-
Just a small update on this.
I have purchased a new flat tension spring washer on ebay and a new click spring.
TC told me there was no tension spring on my sub as the gen does not have one. I did install the tension spring regardless and the wobble is now fixed. I'm very pleased with the result.
-
Thanks guys. I guess i will have to be patient. It.might be an expensive dxercise, i'm looking to buy the gen lol
-
Hi guys
I've been trying to contact tc via his pm box and email but to no avail. Anybody had some luck to get in touch with him? I'm trying to order a v3 bracelet and a V2 datewheel.
Thanks!
-
looks good
-
-
You need a 250 chrono
-
Everyone has avoided the obvious. It's quite possible the bezel was bent during removal. Remove it and lay it on a flat surface, it it wobbles that is your problem, seen it happen before. Even without the tension spring, it should rotate evenly. The tension spring keeps the bezel at the proper height to avoid draging on the case. Hope this helps and good luck.
I just verified the bezel, it's straight. I need to get my hands on a tension washer. I tried TC contacting TC as i want the V3 bracelet as well and some other bits but he seems unresponsive via email and PM. Anybody heard of him lately?
-
Don't use floss...makes a mess after awhile. It's loose due to the lack of tension spring as TC is built to gen spec. Good luck!
Thanks, i wasn't planning on using the dental floss
-
Thanks for the tip about the dental floss hahaha.
No tension spring for sure on my submariner, my watchsmith must have not put it back for some reason!
-
Is the TC submariner supposed to have a flat tension washer (spring) between the crystal retainer/case and the bezel?
Mine doesn't...
-
the problem began after the bezel installation yes, my watchsmith had to take it off to change the crystal. It's a TC sub but i emphasize that the wobble was not present before the operation when i received the watch from TC, it was tight to start with. The bezel insert and bezel are fine and no play and are installed perfectly. It is the bezel itself that had a slight wobble in it, which can be felt when pushing on the bezel on the 12 and 6 o'clock indices.
-
I have a 16610 sub and there is a slight wobble in the bezel, it can be felt when pushin on the 12 and 6 o'clock indices.
I have read on the rolux forum that some gens also have this problem but i did not find a solution to this problem.
The problem occured after the bezel was reinstalled.
Does anybody know how this can be fixed?
Many thanks.
-
Thanks guys, i'll go and check out the trf as well
-
TRF?
Have you tried TRF? They always have some there.
TRF?
-
I'm just looking at this,
does this look like the real deal:
what whould a sensible price be for this bezel?
-
Anybody knows where i can find one?
Pam 127 - spot the oddity
in The Panerai Area
Posted
I was just looking at this and something struck me:
http://www.lacotedesmontres.com/Annonce-Panerai-PAM-127-Luminor-1950-Full-set-No_43463.htm
Anybody that can see what i mean?