-
Posts
867 -
Joined
-
Last visited
Posts posted by Bazz
-
-
Congrats, that movement is amazing!
-
Yea, I know I have some that I have put quite a lot of work into but generally speaking most of mine are just cropped, sharpened and levels adjusted.
Once I understood how to use the manual functions it makes it a lot easier to get right 'in camera'
-
Obviously using it in the trade section to misrepresent an item is not on but for wallpapers etc I say knock yourself out.
Some of use probably use it less than you think.
-
I had this one on today,
-
Had this on the last little while,
No wrist shot sorry, have not had a chance for many new pics of late.
-
Sorry for your loss Laz, he was far to young.
-
-
Congrats
-
LOL - I wonder if Dallaglio is slipping him a gram or two in that handshake
,
I did read about some of the reactions over there and if someone had to make that call I am glad it was an Aussie
I think the chance of Stuart Dickinson heading over for holidays at the moment would be as short as Wayne Barnes going off to New Zealand!
-
A couple of my 063
-
Think we need to be clear if we are talking about pressing the bezel, or the crystal.
Im not sure either, if Cats wants to remove the movement etc. he will have to remove the bezel which in turn has the crystal in it.
I can not see any reason to want to remove the crystal from the bezel and anyhow, there is no way to do it while both are still on the watch... and you cant get to from behind as the movement only comes out the front
-
To replace the movement on these fiddys you have to take them out the front of the case.
If you look around under the bezel you will see a slight grove under it which can be used to gently pry it up.
These are a big pain in the bum to press back on! I went to a large hardware store and bought a piece of high density plastic pipe the same size as the bezel and used it with a press to push it back on.
Im sure The Zigmeister has the correct size dies for it but my other problem is the height the crystal protrudes above the bezel and the pipe I used placed no pressure on it.
There is already a gasket for the bezel and case so there is no reason not to use that one.
I would not recommend doing this yourself if you don't have much experience, when you put the pressure on it really gets the heart rate going ... awaiting the dreaded sound of an exploding crystal!
-
Who was the poor bugger who had to make that call?
The TMO was Stuart Dickinson, congrats to the Boks well deserved champions, nullified the England scrum, dominated the line outs and played very disciplined throughout
England also did very well throughout the tournament and at the start you would have been hard pressed to see them contesting the final and just to show I am not still annoyed at being knocked out by them...
The Correct Etiquette On Greeting An English Rugby Player
-
Saturday,
Regardless of accuracy, the finish on these is superb!
-
Wow takashi, nice dial and hands.
My one,
-
Friday
Have a good one!
-
I had my 187 crystal double coated in one of Chieftang's earlier runs and the silver ring survived the process.
-
I also agree with the others who suggested the blue hands may look nice.
Those really are gorgeous movements
-
The Safa's should win, they have a much better pack than Australia and are more dangerous out wide than France. Just depends if SA play smarter than Aus and France did and don't get drawn into a forward battle. Fair play to Eng for doing so well after being written off after the 36-0 drubbing in their first game and although they are much improved since then the Safa's should get up on the weekend.
-
Had this one on to start the week, I really like this combo especially the double AR.
@ Pugwash, glad to hear it went well.
-
lol, i do the same!
+1!
-
1665 today
-
No new pics here either but here is some eye candy,
PO 45mm
42mm
Bondy
Moon
And a couple of others
-
This one today,
Mid-Week Wrist-Check (24-25 Oct. 2007)
in General Discussion
Posted
Today,