-
Posts
2,813 -
Joined
-
Last visited
-
Days Won
104
Posts posted by dbane883
-
-
-
I like to keep my favorite inserts secured to bezels. I'd rather swap out the bezel than risk wearing out the insert edges when I want to have a different look on my subs.
Top left is a long 5. Too right is a regular (MKIII) fat font. Bottom right is a "kissing 40" version of a MKIII (some incorrectly call it a MKI) ghost. Bottom right is a very rare version of a MKIII where the cliches wore out so much that even the 50 is kissing.
I should probably not leave out my favorite. A kissing 50 Long 5:
One day I will find a nice red triangle insert for the big crown (it will have to be a lucky GoodWill find). Also, missing is a "skinny 40" which would round out the collection nicely.
- 5
-
-
Looks good. CGs are a bit chunky however. 2mm lugholes is waaay to big btw. It doesn't accept gen spring bars??
Holes should be 1.25mm
-
Seriously. He's really dead this time.
-
-
So many dummies on TZ. That case is not good.
-
There were two versions of the 666 glossy dials. The fonts (particularly "ft") are quite different on both. Further, original 666 glossy's were "SWISS -T 25
What you have is a service dial. Again, there were 2 versions of the 16660 dial. One is "SWISS MADE" and the other is "SWISS"
-
Congrats on the build. And kudos for resourcefulness. The Seiko movements are bullet-proof.
Tonney dial looks quite good.
-
Yes Ubi. Gen. Just received new insert today to replace the one I've been using:
-
-
I use a 6 - watch box from Costco. It does the job.
If you don't like it, you can always return no questions asked.
-
- 1
-
You could try an ST bezel. It will need polishing first though.
Nice bunk bed.
-
Are you going to mod the MBW to be a PCG?
-
-
Looks great. Is that a CWP T19 plexi?
-
Yup. Not a 16800. Unless it's a weird Franken Milsub version with fixed bars.
Plus, the bezel is a 5513/1680 bezel
-
-
Great job.
On your next one, try adding material just to the bottom of the lug tips. I don't think adding metal to the top of the lugs is necessary.
Very well done
- 1
-
-
Is the chapter ring printed? All the other gilt parts look like they are negative relief.
-
-
No. No effect on appearance.
Tonnywatches, a "new" maker opinions?
in The Rolex Area
Posted
Could be the white balance used to take the photo. The background is off white too.