hologramet

thank God it's Saturday. I can smoke a stogie without worrying about smelling like a walking dead at the clinic. But... Which to choose? 3 favourites, this will be hard.

No filters. Love it.

I can't confirm something promised to me when there is a MOQ of 5 each. There is no "prototype" dial. However, this is from the same shop that makes all the Vietnam dials supplied by MQ, tonnywatches, dung_chrono, gan_antique, watchpartskane/Ruby etc.etc. You get what you pay for. The gilt will be the brass plate underneath. The dials will be supplied with a white base coat on the "indices/lume plot areas". The red 300/1000 will be on a white base with red raised printing over. Other than that I can not promise anything, my word can't rely on someone else's word. The only confirmation I can give is that it is in my own interest to get the best dials possible and that includes correct dimensions/details, negative relief, correct printing, white paint for someone I trust better for the luming to do the lume on etc.etc. /V

All the trusted dealers can get basically the same stuff. You pay less or a more depending on the customer service, website etc. My favorites are Torobravo, Sead (Supermirrors). Good luck!

Come on now! 1 left of each! This is making baby-Jesus cry...

The 3-6-9 is straight off from the original dial, the unchanged. That is the result of the angles of the original dial. There's no point in nitpicking small details. The dial will not be a clone. The same goes for the gold-plated look of the dial. The best possible to replicate will be a brassy gilt tone. Remember this is a 400-ish USD copy of a 2000+ USD dial.

I don't get it really.. Have you used a TC LV v2 dial and relumed the markers with BGW9 or? Genuine bezel insert is uncommon. Congrats on that one! Caseback stamped 2160 which is for a 5-digit sub?

BUMP! 1 216A left and 1 809H left!

Beautiful! I admire your pursuit for that extra in this case "click". Maybe time to finally pick one up.. Still a Maxi LV dial and handa, no cyclops sapphire and LN. Pure magic.

Best "least invested monetary-wise and most bang-for-the buck" 1 @Bart Cordell Split 2: @Dlf@JoeyB Results-wise/skills @Dlf no doubt about that as we all know Best no-costs spared 1 @dbane883 200/660 RED 2 @dbane883 3-6-9 200-660 FT 3 @dbane883 pick any of the remaining, and they're up here My contribution are two pieces that were given the final massage by Rolojack: HR6538 Slimmed case profile and both lugs, deepened crown tube insertion Custom HR 6200/6205-ish Chapter dial (originally from Dlf) Hand combination of HR and TigerConcept Insert HR 6538 aged and lowered into the bezel Custom lume by Big Daz, aged by Rolo Second contender 5512 with a Glidelock Solid-linked Frankenstein bracelet:

Beautiful work... Who would have known that my prototype watch would spawn more? Or is it the other way around? Anyways, you are a master, and my go-to-guy and friend. Maybe if I get those "29mm ETA dials with gilt" because that's the cream of the crop, and 5 people would advance, we can create a template, and then it's just for more batches to get going?

Sweet! A big tip is using several different dials and pics to create an as-clear-qs-possible picture. Maybe you find a super Swiss on a good 6538 dial. Maybe the coronet is clearer on a 3rd dial etc. Don't think I have to teach you tips as you've gotten really good. Also... Burn and the Dodge tool are you're best friends along with Adjustments/Levels

1) There isn't a 904L steel version, and there's no real point with it either. 316L is good enough. 2) Check trusted dealers e.g. www.intime.co www.torobravos.xyz www.puretime01.com etc. The one you want is the Noob 116610LN v7 SA3135 verison

Sou... A question to those who might know. 1) Is the pearl Chromalight or SL C1? the follow-up... 2) and the dial lume? "Chromalight" or SL C1?

Updated... Nanuq has given his blessing. We are on! -- We'll see with the 6538. Hopefully we can use their already existing dials and simply let them adapt the logo, text etc to a tiny bit larger dial (a bit larger chapter ring etc...) But first 5 interested ones, before I even put any work into that.

That is what I have requested quite explicitly, so I def. hope so!

OLD VERSION:

Sorry for triple posting this, but since there are several threads regarding my Tempus Machina builds, I figured.. Where should I write it? --- NEWS 5 dials of 216A and 5 dials 809H are on the way. On ETA-feet only. 1) Noob v7 114060 is only available with A2836 (as far as I know) 2) There would be another MOQ of 5 dials to make 5 3135-dials. 3) I can't find any sterile dials on 3135-feet for an accetable price. Currently reverse-"engineering" the 809H dial using mix and match of segments from different dials. Hopefully a small "group buy" can be made, checking with Nanuq as we speak. Why? Well last time I made dials with HR and had them lumed by Big Daz I lost 400 USD on making an extra set of dial + hands because someone who really wanted one, then fell through. I donated this set to the forum and i think StoneP is making a simple 216A for an upcoming raffle. Price: 1) About 200 USD unlumed per piece. (+ shipping) 2) Option: Possible to add lume with real Superluminova C1 "puffy"/"creamy". Price approximative 100EUR incl. shipping > The deal is BYOH (bring your own hands). Lume of them is included in the price. BP-hands 116613/8 with ETA size can be bought at the same time as the 114060 (so add that), Why? 1) they don't use Superluminova 2) their lume plots have a tendency to loosen during shipping (2/8 dials I've received have had this problem) ---- The small print: I'm checking with various modders on the forums to see if I can provide a "whole" package for those interested. That means I can arrange a price with different guys (hopefully), which makes it much simpler for them and for you. This to provide an "all included"-price so you know what you're getting in to. To clarify: 1) I will only get dials made, as there is a MOQ from the shop. 2) This is not an attempt to make money. All the hours I've put in to the dials and details would have since long bought me a gen 114060 if I would have worked instead. But what's the fun in that. 3) As we all know, I can only guarantee that I do my best with the sketches. I can't promise anything when it comes to the results they produce, neither can I promise anything regarding the lume job. However, you can rest assured that it's in my best interest to get it as good as possible. Since I don't know of any other option to get these dials done in gilt and on ETA-dials. Therefore, this is just an show of interest... Still up to Nanuq and/or rest of admins/mods to give approval before any cash what-so-ever is moved. Nanuq has given the go sign, I'm going to map up a smart way of doing this with a realistic time schedule. 216A 1) hologramet 2) aphilllipe 3) ww12345 4) ant1 5) GBOGH (no lume job) FULL 809H 1) hologramet 2) DVNE? 3) aphillipe 4) ww12345 5) --- Possible option if interest is shown: 29mm 6538 Red 200/660-dial on ETA 1) - - - 2) dpap 3) ww12345? 4) --- 5) ---

NEWS 5 dials of 216A and 5 dials 809H are on the way. On ETA-feet only. 1) Noob v7 114060 is only available with A2836 (as far as I know) 2) There would be another MOQ of 5 dials to make 5 3135-dials of each 3) I can't find any sterile dials on 3135-feet for an accetable price. Currently reverse-"engineering" the 809H dial using mix and match of segments from different dials. Hopefully a small "group buy" can be made, checking with Nanuq as we speak. Why? Well last time I made dials with HR and had them lumed by Big Daz I lost 400 USD on making an extra set of dial + hands because someone who really wanted one, then fell through. I donated this set to the forum and i think StoneP is making a simple 216A for an upcoming raffle. Price: 1) About 200 USD unlumed per piece. (+ shipping) 2) Option: Possible to add lume with real Superluminova C1 "puffy"/"creamy". Price approximative 100EUR incl. shipping > The deal is BYOH (bring your own hands). Lume of them is included in the price. BP-hands 116613/8 with ETA size can be bought at the same time as the 114060 (so add that), ---- The small print: I'm checking with various modders on the forums to see if I can provide a "whole" package for those interested. That means I can arrange a price with different guys (hopefully), which makes it much simpler for them and for you. This to provide an "all included"-price so you know what you're getting in to. To clarify: 1) I will only get dials made, as there is a MOQ from the shop. 2) This is not an attempt to make money. All the hours I've put in to the dials and details would have since long bought me a gen 114060 if I would have worked instead. But what's the fun in that. 3) As we all know, I can only guarantee that I do my best with the sketches. I can't promise anything when it comes to the results they produce, neither can I promise anything regarding the lume job. However, you can rest assured that it's in my best interest to get it as good as possible. Since I don't know of any other option to get these dials done in gilt and on ETA-dials. --- If the Tempus Machina-guys have anything to add, now would be a good time!

NEWS 5 dials of 216A and 5 dials 809H are on the way. On ETA-feet only. 1) Noob v7 114060 is only available with A2836 (as far as I know) 2) There would be another MOQ of 5 dials to make 5 3135-dials. 3) I can't find any sterile dials on 3135-feet for an accetable price. Currently reverse-"engineering" the 809H dial using mix and match of segments from different dials. Hopefully a small "group buy" can be made, checking with Nanuq as we speak. Why? Well last time I made dials with HR and had them lumed by Big Daz I lost 400 USD on making an extra set of dial + hands because someone who really wanted one, then fell through. I donated this set to the forum and i think StoneP is making a simple 216A for an upcoming raffle. Price: 1) About 200 USD unlumed per piece. (+ shipping) 2) Option: Possible to add lume with real Superluminova C1 "puffy"/"creamy". Price approximative 100EUR incl. shipping > The deal is BYOH (bring your own hands). Lume of them is included in the price. BP-hands 116613/8 with ETA size can be bought at the same time as the 114060 (so add that), ---- The small print: I'm checking with various modders on the forums to see if I can provide a "whole" package for those interested. That means I can arrange a price with different guys (hopefully), which makes it much simpler for them and for you. This to provide an "all included"-price so you know what you're getting in to. To clarify: 1) I will only get dials made, as there is a MOQ from the shop. 2) This is not an attempt to make money. All the hours I've put in to the dials and details would have since long bought me a gen 114060 if I would have worked instead. But what's the fun in that. 3) As we all know, I can only guarantee that I do my best with the sketches. I can't promise anything when it comes to the results they produce, neither can I promise anything regarding the lume job. However, you can rest assured that it's in my best interest to get it as good as possible. Since I don't know of any other option to get these dials done in gilt and on ETA-dials.

It's an Adobe Photoshop pdf (actually psd) with embedded fonts. Try opening it that way. I'm on vacation so unless someone else can upload, that's all i can offer for now.

A simple basic version is in the works. It'll be Noob v7 116610 based. 2836 to keep things simple. Aprox 1000€ to 1300€ is the price. Completely nonprofit. Pm for interest.

Found a much better crystal that will be used in both the 216A and 809H Tempus replicas. Now... The dials. 3 pcs of sterile dials are soon on the route to Vietnam. 1 custom 6538 200/600 dial 1 216A 300/1000 dial 1 809H 200-600ft dial

As for crystal... I think I found some alternatives: http://m.ebay.com/itm/111949154458?_mwBanner=1 29mm crystal Double-domed Blue AR 30€ --- http://m.ebay.com/itm/SEIKO-100M-DOUBLE-DOMED-AR-SAPPHIRE-CRYSTAL-GLASS-SKX031-SKX033-J-K-7S26-0040-/ http://www.dagazwatch.com/apps/webstore/products/show/5312101 http://www.dagazwatch.com/apps/webstore/products/show/1047720 http://www.dagazwatch.com/apps/webstore/products/show/1527797

Anyone interested in joining in? My final recipe will be: 1} Noob 7 114060 SA3135 2} Yuki3135 with decorated bridge and franken upgrades // Serviced and modded by Rolex watch smith 3} Custom Vietnam dial in the style above. 4} TC 11613 gold hands Above parts lumed/relumed by Big Daz and/or Vietnam guys w/ gen Vintage Superluminova 5} Athaya Twinlock 7mm crown and tube 6} Relumed pearl with Vintage Superluminova 7) Modding of midcase, bracelet etc. 8} As for crystal... I think I found the one! http://m.ebay.com/itm/111949154458?_mwBanner=1 29mm crystal Double-domed Blue AR 30€ 400 + 1000 + 200 + 25 + 120 + 45 + 400 = 2190 €, and that includes a lot of overestimating.