Hok

My little Franken project has been sitting in the drawer now for 4 years. Is there anyone who could give me the correct part number and/or cousins-uk item number for a replacement dial for the 41mm SMP 2254? I frankly don't trust myself anymore edit: arghl it seems omega restricted these parts. I think I am gonna cry.

thank god for the price increase, I was going to sink lots of money on different items i really don't need.

thank you all so very much. never had any issues with price angels, IMHO a very trustworthy HK discounter.

is there someone who has a gen dial or who could tell me what measurements are correct? thanks

Here a quick and dirty pic: http://imageshack.us.../dsc04156k.jpg/ From left to right gen dial, cousins Item x22935 / omega 064pp3111033 32,6mm rep dial 1 (replaced after mix-up) with asian eta underneath. ca 31mm rep case, AR, waterproof, rep dial 2 (ca 31mm, too green, nice lume) and gen hands. I used cousins part finder to order the dial, which gave me 3 options for the case omega 168.1640: 064pp3111033 (the one I got) 064pp33011033 (the one that should fit) 064pp33011034 (blue dial, should fit) However I fear they won't reimburse me. I think I got the one I ordered, it has p3111 stamped on the back, and cousins will not care if their part finder made an error.

thanks a lot triplehd. I must have ordered a wrong dial from cousins. at least I know how to fix the project. it seems like the cousins part finder gave me the wrong part for my case. gonna contact them...

could it be that I bought the wrong gen dial? I did a search on the net and couldn't find the size for it. Maybe one of the members could measure on of theirs? thanks chrgod for your commiseration . when this watch is as I want it (I hope I'll get there) I'll be happy, regardless of the money sunk. EDIT: I think I'm gonna cry. Gen SMP dial size seems to be 30.5mm according to some ebay sales. I ordered cousins Item x22935 / 064pp3111033 which has 32,5mm. should fit case 168.1640. Am I being stupid again? Could someone tell me what size the gen dial is?

Hello, this is my first Franken-Project, and I already more than regret it. Part of it is my own spectacular stupidity (bought parts for a mid-size SMP), part is just plain bad luck. I got a black SMP from watch-polo, which due to a legitimate mix-up already gave me some trouble. I let a trusted modder install a gen eta 2824, which now has reserve probs and needs to go to the doctor. This is cousins-uk fault, the movement already missed a date-wheel from the beginning. got a very nice AR tough and some water-proofing. but, the worst thing, the gen dial I bought doesn't fit the case. case inner-size is 31mm diameter, gen dial 32,6mm, rep dial seems to be 31mm too. so I still got the rep dial in it, but gen hands (different shade of green than the dial, of course) and a failing movement. and an innocent asian ETA in my desk. my question: Has anyone heard of or seen cases that wouldn't take a gen dial? I always thought the parts were interchangeable. I'd already be more than happy if I could fit the gen dial. cheers and thanks for the support, Hok

A gear was missing. Thanks a lot cousins.uk

thank you guys, will do.

now that you mention it, the image I posted IS wrong... so, heres my movement. best I could do with my camera http://img72.imageshack.us/img72/2488/dsc03604o.jpg I'm not yet sure if I want to remove the face plates so I can see what the date change mechanism does... but if it has to go to the horologist anyway...

Hello kbh, thanks for your answer, I think I am getting what you mean the manual change feels normal. if we say the stem is at 3oclock: the gear at 4 oclock is working correctly. also, the spring at 9 oclock is correctly between the teeth (took me a bit until I figured that one out). Both are positioned exactly like on this picture http://www.chronometrie.com/eta2824/images/eta2824d.jpg

Hello, I recently bought a new, gen Eta 2824 for a seamaster project. I swapped the date wheel. Switching the date manually does work, however it doesn't work when I try to change the date by advancing the time 24 hours in time setting mode. Sadly, I didn't check if date change worked before I swapped the date wheel. I used the easy swapping technique, where you don't have to dissassemble anything. Could it still be that I did something wrong? Is there any reason that a uninstalled movement (with no hands attached) would not advance the date? did I buy a faulty item? thank you for your advice.

Yes, I'm actually asking for the rep of a strap is there a rep or OEM alternative for this double-ridged bad boy?

thanks for the answer. I had this feeling, too.

Hello, I kind of have the same problem. I just received a 180 USD watch from a trusted dealer here, declared as a Swiss ETA 2824-2. Power Reserve, whether I wear it a day or wind it up, is ca. 8 hours. The watch is well regulated, gains 5 seconds in 12 hours. What would be a reasonable expectation when contacting the dealer? Or is this something a service can fix RELIABLY and that I shouldn't bother to tell my dealer? thanks a lot

well it's a gift for someone who can pull it off, as a student i am sticking to the seiko divers i'm just in a bad mood because i just realized that the current version is different from ELs, which i was thinking i ordered. (my error, really). and i was already overstretching my budget, too...

Does anyone else own this piece? Would be interested in the size, gen is 39mm and the dealers say the rep is 36-37mm...

no problem. she's 60 years old, civil servant 'executive'. i'm rather searching for a classic watch like the breguet or the patek, with guilloche dial and such. BUT if it is nice, i'll take something more sporty (like the j12) too.

i know, as long as its not too large, it can be a gents model too. jlc master control, btw. i think i have lots of research to do

first model of "audemars piguet" i found one that really hits the spot... breguet classique guess it'S a bit too thick, but this is gonna be a problem with most dresswatches i guess... calatrava would fit too.

yes, those are sexy as hell. but rather on the large side of things, rather 40mm than the advirtised 38mm. and not too easy to get anymore? is there a review for the jules audemars offered by Precious Time?

Hello, my mom's birthday is coming closer, and i want finally to offer her a nice rep. she already has a gen cartier tank, but searches for something a bit larger with running secs. i already scouted her tastes, and it comes down to this: dress watch 38mm tops white face mechanic (!) large running seconds (!) good finish AR would be nice reliable movement too i looked around a bit, found some that are interesting: -jules audemars (no review on that here?) precious times -longines masters from precious times -chanel j12 white, a bit more flashy but still interesting -rolex ym, quite sporty, i'm especially unsure if she'll like the cyclops it really doesn't have to be a ladies rep as long as its not too large. can you give me some more tips on what to check out? tia

the original scene from karate kid http://www.youtube.com/watch?v=4NfkH3Q4JOQ aaaand: sweep the leg - music video http://www.sweeptheleg.com/ awesome