Jump to content
When you buy through links on our site, we may earn an affiliate commission.
  • Current Donation Goals

Seamaster Rubber...


mingray

Recommended Posts

As requested/......

dscf2473w.jpg

23mm across buckle

dscf2474z.jpg

22mm at lug end.....i beleive that these will fit all reps as i have a 45mm and that is only 20mm at the lug??.....

There is quite a bit of moulding flash on the strap. This happens when the two halves of the mold do not close up tightly and the resin is forced out the gap. This can be trimmed with a razor. I don't know the resin so I am hesitant to suggest flame polishing (but it works very well with the right plastics). Fine sand paper will also remove the flash. Rub the sand paper along the length of the band.

If you use the razor blade angle the blade so that it is scraping off the flash and not cutting it off. It will take several draws along the length of the strap to remove the flash. (This is the method I would use--it is fairly safe for the strap and reasonably fast. Use a single edged blade held with your fingers.)

Link to comment
Share on other sites

As requested/......

dscf2473w.jpg

23mm across buckle

dscf2474z.jpg

22mm at lug end.....i beleive that these will fit all reps as i have a 45mm and that is only 20mm at the lug??.....

22 mm @ the lugs will work for my UPO 45mm chronograph, not sure about the non-chrono version

i'm down for one in Orange whenever you are ready :)

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...
Please Sign In or Sign Up