mingray Posted July 12, 2009 Report Posted July 12, 2009 (edited) Nope not a Rapper... Thought i would start a new topic as Bezels havent shown up yet! http://www.rwg.cc/members/index.php?showto...20&start=20 Have a few of these if anyone is interested..... I will put them up in the sale thread with 10% going to the forum Ming Edited July 12, 2009 by mingray
ubiquitous Posted July 12, 2009 Report Posted July 12, 2009 Hmmm... Do you have a pic of the case/lug side of the strap?
mingray Posted July 13, 2009 Author Report Posted July 13, 2009 Hmmm... Do you have a pic of the case/lug side of the strap? Will add more pics later....any other shots you need just let me know..
mingray Posted July 14, 2009 Author Report Posted July 14, 2009 As promised... width at lug is 22mm width at buckel 23mm Ming
mingray Posted July 15, 2009 Author Report Posted July 15, 2009 Ming you have a PM As requested/...... 23mm across buckle 22mm at lug end.....i beleive that these will fit all reps as i have a 45mm and that is only 20mm at the lug??.....
Packard Posted July 15, 2009 Report Posted July 15, 2009 As requested/...... 23mm across buckle 22mm at lug end.....i beleive that these will fit all reps as i have a 45mm and that is only 20mm at the lug??..... There is quite a bit of moulding flash on the strap. This happens when the two halves of the mold do not close up tightly and the resin is forced out the gap. This can be trimmed with a razor. I don't know the resin so I am hesitant to suggest flame polishing (but it works very well with the right plastics). Fine sand paper will also remove the flash. Rub the sand paper along the length of the band. If you use the razor blade angle the blade so that it is scraping off the flash and not cutting it off. It will take several draws along the length of the strap to remove the flash. (This is the method I would use--it is fairly safe for the strap and reasonably fast. Use a single edged blade held with your fingers.)
chronoluvvv Posted July 16, 2009 Report Posted July 16, 2009 As requested/...... 23mm across buckle 22mm at lug end.....i beleive that these will fit all reps as i have a 45mm and that is only 20mm at the lug??..... 22 mm @ the lugs will work for my UPO 45mm chronograph, not sure about the non-chrono version i'm down for one in Orange whenever you are ready
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now