ubiquitous Posted August 17, 2006 Report Share Posted August 17, 2006 In a previous thread, I mentioned that my new Royal Oak would be a watch I would leave untouched. No mods, no anything. How many of you believed me? I tried and I tried, but damn it all... I just couldn't leave it alone. Now... Such mentality has backfired in the past, resulting in disappointment, and soemtimes disaster, but this time things worked out alright. I only made one change, and that was a swap of the bracelet. I went through one of my parts boxes, and sure enough, I had a complete Royal Oak bracelet for my watch. As luck would have it, the first link was larger on this one, and even luckier still, the end link tabs lined right up with the slots in the case lugs. Now, this might sound like an easy job, but much to my expectation, I found that it was not (these things are never as easy as they seem to be). The holes drilled for the lug pins in the bracelet end links were positioned too far back, while the new Royal Oak case had the holes too far forward. The holes were also positioned quite close to the bottom surface of the links, so I didn't want to risk cutting through on the bottom by drilling. No, no... Only one method made sense to me, and that was the one I dreaded the most. Using a needle file and my hands, I went to work enlarging the holes. 2 hours later (1/2 hour on each link) and a bunch of cramped up fingers later, I now have a Royal Oak with a much less severe transition from the case to the bracelet... Here is a 'before' shot... And an equally crappy 'after' shot... Before... After... Big difference, no? The difference might not be so apparent in photos, but in person, it's a completely different watch than the one I received two days ago. Definitely a keeper in my books now Thanks for looking... R Link to comment Share on other sites More sharing options...
Jetsons Posted August 17, 2006 Report Share Posted August 17, 2006 Nice job! To my eyes, the difference can easily be seen in the photos, night & day. That was a rather nasty gap between the case & bracelet that I had not noticed before. Just another of those little details that seperate the rep from the real thing. You must have one massive tool box to conveniently have a spare Royal Oak bracelet handy. Is it a gen bracelet? Very nice RO! Jet Link to comment Share on other sites More sharing options...
ubiquitous Posted August 17, 2006 Author Report Share Posted August 17, 2006 Nice job! To my eyes, the difference can easily be seen in the photos, night & day. That was a rather nasty gap between the case & bracelet that I had not noticed before. Just another of those little details that seperate the rep from the real thing. You must have one massive tool box to conveniently have a spare Royal Oak bracelet handy. Is it a gen bracelet? Very nice RO! Jet Thanks, Jet. I have all sorts of stuff in my parts box. Some of it is stuff that I am not even sure how it got there. And yes... Not all of it is Rolex either The bracelet is a rep... But it is quite a bit nicer than the original that came with this watch. I'm looking at it now as I type... I love it Link to comment Share on other sites More sharing options...
rek001 Posted August 17, 2006 Report Share Posted August 17, 2006 Good job, Randy! That looks much better. Hmm, that gap in the original bracelet is pretty bad, now I'm not sure about getting it. I believe Thomasng said the same thing about his so it is a consistent situation. Link to comment Share on other sites More sharing options...
Quarks Posted August 17, 2006 Report Share Posted August 17, 2006 Oh... what a difference! ... And the mods you have done made this watch a perfect RO!! Well done. Link to comment Share on other sites More sharing options...
Linder Posted August 17, 2006 Report Share Posted August 17, 2006 So where did the replacement bracelet originally come from? Link to comment Share on other sites More sharing options...
ubiquitous Posted August 17, 2006 Author Report Share Posted August 17, 2006 Thanks, guys. The watch looks and feels completely different. It's amazing the difference a bracelet can make! I have but one more mod I might make... That being the hands. Somewhere in one of my pars boxes, I know I have a different set of hands from an old ETA Royal Oak- The hour and seconds hand are slimmer if I recall correct. I might have to dig them out to have a look-see. As for where the replacement bracelet originally came from? Good question. I don't recall. I've had a number of the old TW Royal Oaks that River and EL sold over a year ago, as well as a few others from King and other dealers. I don't quite recall which one this was off of... Link to comment Share on other sites More sharing options...
Richard Tracy Posted August 17, 2006 Report Share Posted August 17, 2006 Great Work Ubi.... You inspire me again to begin to tackle some of my peeves.... Link to comment Share on other sites More sharing options...
sonystyle Posted August 17, 2006 Report Share Posted August 17, 2006 Youre really lucky with bracelet that you had one in your supply box, it looks much better and fits the watch great. Its the little details that make or break a watch. Link to comment Share on other sites More sharing options...
cosmosblau Posted August 17, 2006 Report Share Posted August 17, 2006 Great work, ubi. Would you want to sell me that watch? I was so primed up to get this rep, but your original pics made me feel this flaw was too annoyingly obvious. You've really fixed it! Link to comment Share on other sites More sharing options...
ubiquitous Posted August 17, 2006 Author Report Share Posted August 17, 2006 Sorry cosmo, but no plans to sell... At least not in the immediate future. But, one never knows when a particularly expensive project might come up that might need funding... Link to comment Share on other sites More sharing options...
Linder Posted August 17, 2006 Report Share Posted August 17, 2006 In which case I will be there ready to purchase some parts of yours Link to comment Share on other sites More sharing options...
irongambit Posted August 17, 2006 Report Share Posted August 17, 2006 Man Ubi! I got tricked into reading this post...based on your post title, I was looking for something else. But I digress... You've got this looking quite sharp. I'd love a dealer to notice that to source a newer case and an older bracelet would make the ULTIMATE RO! Then if they would preservice and then have priests of several religions pray over it, we could have the ULTIMATE AAA+++ RO GRADUATED SUMMA [censored] LAUDE! (Sorry, it's been a long day here so bad humor seems to be the prescribed medicine for me). Link to comment Share on other sites More sharing options...
ehtolcad Posted August 17, 2006 Report Share Posted August 17, 2006 randy most members would love to just own your spare parts box, let alone the regular collection. at first i thought it was much ado about nothing, but the last few pics and on the wrist tell the whole story. looks good to me! Link to comment Share on other sites More sharing options...
Watchmeister Posted August 18, 2006 Report Share Posted August 18, 2006 Aah AP! Man is that original bracelet mismatched. Critical mod. Link to comment Share on other sites More sharing options...
ubiquitous Posted August 18, 2006 Author Report Share Posted August 18, 2006 Thanks, as always, for the kind words, gang. I spent the day with this one, and *looks around*, don't tell my El Primero Daytona this... But I could see myself wearing this for a good majority of the time I have a watch on the wrist. The look and feel of this one is completely changed. Me loves... Cheers, R Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now