dadog13 Posted July 25, 2009 Report Posted July 25, 2009 (edited) Hello vintage lovers... I have in plan to make some custom made brass (if somebody wants, these can be done out of aluminium as well) movement rings for the vinatage PAM's - Angelus & Cortebert... This post is made with the intention to see how many interest there is for this kind of parts...I got a couple of PM's in the past months thus I decided to check whether there is any interest or not... I have done a couple of them in the past for some of my friends and they appeared to be OK.. Please state the type and number of them...all reply's in this post, no PMs at the moment! Please take a look at the next couple of pictures to see how an Angelus mvt ring looks like (this one is mounted in a 6152/1 case from DSN) : Edited July 25, 2009 by dadog13
dadog13 Posted July 25, 2009 Author Report Posted July 25, 2009 seems that members over at RG have more vintage projects in the drawers than the one from RWG..there has been expressed some interest (it looks like a limited run will be done)...I'll however wait a week or two before I do the list of interested members...in the meantime I hope there will be done drawings for different type of movements/cases... bump...
kye_lin Posted July 25, 2009 Report Posted July 25, 2009 Hi.. You know I want them! 2 angelus and 2 cortebert Thanks.. Kai
flyback Posted July 28, 2009 Report Posted July 28, 2009 Dadog13, a lot of people from rwg are repgeek members too. I have already replied on rg i'm interested with brass mvtholders for Molnija.
dadog13 Posted July 28, 2009 Author Report Posted July 28, 2009 Dadog13, a lot of people from rwg are repgeek members too. I have already replied on rg i'm interested with brass mvtholders for Molnija. I know that members usually are registered on both forums.. I thought that everybody will reply once, or here or there...cause my decision of making these will be only if I have a certain number of interested people. seems that there is interest for the mvt rings.. If I read correctly the interest is for the following movements : molnija 3602cortebert 616 (other?)angelus sf24045mm47mm There is already one drawing (made by rmcsherry) existing - for the Angelus SF240 to suit a 47mm case...it has been tested and it is good. What we would need now is to make drawings for other movements/cases - I am not the most skillful to do it, thus it would be great if some members could do it (the 1st one who does it correctly, will be rewarded with a free mvt ring)... We have to foresee all the possible problems with these, cause I do not want to see this project fail...I did not handle a lot of different type of cases nor movements thus I do not know if cases of the same size but from a different maker have actually some different measures...I am looking forward to hear the opinion from members.... so let's bring this project to it's 2nd phase... last but not the least, let me hear what do you think it would be a fair price for a custom made movement ring?
dadog13 Posted July 28, 2009 Author Report Posted July 28, 2009 member rmcsherry strikes again! R was kind enough to make the first drawings...please take a look at the picture that I will attach and let me hear your comments (members who have in hand movements and cases - please review this drawing if needed) :
flyback Posted July 28, 2009 Report Posted July 28, 2009 To R : Are Cortebert 616/Molnija 3602 dimension the same ? I Think so because Russians bought the tooling from Cortbert. To Dadog13 : I let you choose the price that you think is fair. Your project, your price !
dadog13 Posted July 28, 2009 Author Report Posted July 28, 2009 another drawing has been sent by member merlin699 (RG member) regarding the movement ring for the molnija 3602 suited for mini fiddy case - please share your thoughts and comments : merlin699 said for another case the height 3mm should actually be 4.5mm and the outher width should be "X" depending on the case (and not 37,7mm like on the pic)
rmcsherry Posted July 29, 2009 Report Posted July 29, 2009 To R : Are Cortebert 616/Molnija 3602 dimension the same ? I Think so because Russians bought the tooling from Cortbert. To Dadog13 : I let you choose the price that you think is fair. Your project, your price ! I'll check the dimension differences - I think the Cortebert tooling / Molnija thing is just a myth - whilst the 1950's Molnija does share some remarkable similarities, the thickness, main bridge diameter, gear pinion thickness etc. are all different - I suspect they've taken the design and made their own version of the movement that shares some dimensions / visual similarities. From what I remember, the 1950's Molnija is very different to newer models, so we'll have to check the dimensions of a few movements before proceeding with this one! If anybody has any feedback on the existing drawings (mine and Merlin's), then we can make the necessary changes. It'll also be useful if you all measure the internal case diameters of your watches - there might be 3 or 4 standard sizes that can be used for this project.
kye_lin Posted July 29, 2009 Report Posted July 29, 2009 Should make rings to fit a standard 47mm fiddy case as well..... are they the same as a DSN 47mm case?
flyback Posted July 29, 2009 Report Posted July 29, 2009 I have removed the aluminium ring (thats fits a 6497) from my Davidsen 6152/1. Outer diameter of the ring is 39.45mm Height is 3.45mm
Neuuubeh Posted July 29, 2009 Report Posted July 29, 2009 (edited) I have a small noob question -> do both Radiomir-style 47mm cases and the Fiddy-style 47mm cases have the same "interior"? I'd be interested in rings for Molnija (the old 50's styled ones), 1 for each Radiomir (either 45 or 47mm, depending on the answer above ) and 1 for Fiddy. Shout when you have more info for us please Edited July 29, 2009 by Neuuubeh
rmcsherry Posted July 30, 2009 Report Posted July 30, 2009 I have a small noob question -> do both Radiomir-style 47mm cases and the Fiddy-style 47mm cases have the same "interior"? I'd be interested in rings for Molnija (the old 50's styled ones), 1 for each Radiomir (either 45 or 47mm, depending on the answer above ) and 1 for Fiddy. Shout when you have more info for us please Radiomir 47mm's are usually smaller movement rings; mine are 37.2mm compared to 39.5mm for a Fiddy.
Neuuubeh Posted July 30, 2009 Report Posted July 30, 2009 I see.. Then I only need one ring - Molnija for a 47 Fiddy case . Thanks! Nick
rmcsherry Posted August 4, 2009 Report Posted August 4, 2009 I'm happy to draw up the final specs - just give me a shout with what you need
DrL Posted September 22, 2009 Report Posted September 22, 2009 very interested in rings for 1950s molnija! thanks for this offer!!
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now