mingray Posted August 16, 2009 Report Posted August 16, 2009 Got myself some lume paint,it glows like hell,but when i apply it,after it dries it turns into what feels like icing on a cake!!...dry icing thaqt cracks!..do i thin it down and with what?.... Ming
gioarmani Posted August 16, 2009 Report Posted August 16, 2009 What binder/varnish (liquid) are you using to mix? Are you mixing at a 1-to-1 ratio? Different colors have different size grains too, don't forget, and the larger (more coarse) the grain, the brighter the lume glows.
mingray Posted August 16, 2009 Author Report Posted August 16, 2009 What binder/varnish (liquid) are you using to mix? Are you mixing at a 1-to-1 ratio? Different colors have different size grains too, don't forget, and the larger (more coarse) the grain, the brighter the lume glows. It came pre mixed...it looks quite thick and as i say when dry resembles icing!....should i thin it down?? Ming
smc Posted August 17, 2009 Report Posted August 17, 2009 Unfortunately the pre-mixed luminous paint is not going to cut it for reluming
mingray Posted August 30, 2009 Author Report Posted August 30, 2009 (edited) Ok...bought some powder from Glow inc,very good v10 green and some blue ultra...mixed it up with some wood glue to try it,and it glows very well ,but again i just cannot get to mix right... it dries ok but if you rub it,it just turns to powder....any advice on what binder to use??.... clear nail varnish perhaps?....any excuse to raid the wifes cosmetics! Edited August 30, 2009 by mingray
smc Posted August 30, 2009 Report Posted August 30, 2009 Your best bet it to get proper binder from either tritec or noctilumina. Good quality nail polish may or may not work for you.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now