Accutron_Guy Posted September 20, 2009 Report Posted September 20, 2009 how tall is that crystal accutron? Best I can determine it is close to 2.5 mm above bezel. This is on the sapphire model. Kind of hard to get a caliper reading with the domed crystal. Good Luck!
FxrAndy Posted September 20, 2009 Author Report Posted September 20, 2009 My plexy is sat about 2mm in the centre and 1.52mm if i mesure with the vernier depth gauge on the side, as the crystal domes to the middle then i read this to be about 2mm in the middle
highoeyazmuhudee Posted September 21, 2009 Report Posted September 21, 2009 do you think the sternkreuz 336 is the best choice for one not wanting to mess with glue?
guiness Posted September 30, 2009 Report Posted September 30, 2009 i bought this watch but the chrystal was not rounded like yours it has a funky edge.
docdoc Posted October 1, 2009 Report Posted October 1, 2009 (edited) here is a pic of the profil of a gen with hesalite (I guess) Edited October 1, 2009 by docdoc
FxrAndy Posted December 21, 2009 Author Report Posted December 21, 2009 I know what my next speed mod will be now, quite simple really when you think about it. Can any one guess what it is??
highoeyazmuhudee Posted December 21, 2009 Report Posted December 21, 2009 hmmm. could be one of several things...so im not sure. But I DO KNOW i'm INTERESTED!
FxrAndy Posted December 21, 2009 Author Report Posted December 21, 2009 well it wont be visible from the front
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now