jmb Posted September 20, 2009 Report Share Posted September 20, 2009 (edited) OK, y'all, I need some help. I need to replace the el-crappo movement in my Noobmariner with something that will run longer that 3-4 hours without thumping it. I figured this would also be a good time for a high-beat upgrade and decided on the 4813 which I promptly ordered from Cousins. No good, short hand stack and not enough pinion sticking up above the dial to stick the hour hand to. Use thin dial spacer and datewheel overlay rubs so that's no good either. I order another from ofrei and wind up with exactly the same thing. I give up and order a 2813 (I really want to wear the watch) get everything put together up to the seconds hand and there wasn't enough pinion sticking up for the hand's tube to get a grip on!!!!! Does anybody know a reliable source for the correct 4813 with the longer pinions? I'm gonna go broke trying to find a good movement at this rate. I suppose I could admit defeat and just tell people it's a rare special order "SS" (sans seconds) model... Edited September 20, 2009 by jmb Link to comment Share on other sites More sharing options...
redwatch Posted September 20, 2009 Report Share Posted September 20, 2009 I don't know about the 2813 but my noobmariner has a 2836-2 that has worked flawlessly since I got it. Link to comment Share on other sites More sharing options...
Guest HaloArchive Posted September 20, 2009 Report Share Posted September 20, 2009 AJoeSmith sells proper DG4813 and, ETz has the correct one as well. Link to comment Share on other sites More sharing options...
Toadtorrent Posted September 20, 2009 Report Share Posted September 20, 2009 I picked mine up from AJS. I have a local source for them, but have not confirmed if they are the right cannon pinion height. I'm not sure if there is a specific model to ask for to be honest. Link to comment Share on other sites More sharing options...
jmb Posted September 20, 2009 Author Report Share Posted September 20, 2009 After searching on a couple of forums I was left with the impression that he didn't have any more. I guess the SS Submariner is getting closer to a reality... Link to comment Share on other sites More sharing options...
Toadtorrent Posted September 20, 2009 Report Share Posted September 20, 2009 Go to RG and send him a pm. Link to comment Share on other sites More sharing options...
trailboss Posted September 20, 2009 Report Share Posted September 20, 2009 I just had the same problem with the damn 2813! Very annoying, everything was going swimingly up to that point. Anyone know if there is a sec hand with a longer tube? Col. Link to comment Share on other sites More sharing options...
jmb Posted September 20, 2009 Author Report Share Posted September 20, 2009 OK, I'll try the PM route. Hey, Trailboss, the 2813 I got from ofrei looks to have a "protruding" seconds pinion but is DOA - will only run right-side up!. Hopefully they will agree to replace it and I'll at least be back in the game... Link to comment Share on other sites More sharing options...
jmb Posted September 21, 2009 Author Report Share Posted September 21, 2009 I received a reply from AJS that he does not have any more movements and no longer has a source for them. It appears that an inexpensive high-beat upgrade for the a21j may not exist anymore. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now