Jimster Posted September 22, 2009 Report Share Posted September 22, 2009 I need the stem size for the hand wind Lemania Asian movement. Does it take a T48 or T 60 crown - .09 or 1.2 Anybody? Thanks. Quote Link to comment Share on other sites More sharing options...
Drulee Posted September 22, 2009 Report Share Posted September 22, 2009 I've got a post somewhere here asking the same question, no answer yet though. The movement is actually the Sea-Gull ST19 that we need the stem details for. I'd also like to know where one can get the stems from. Quote Link to comment Share on other sites More sharing options...
Jimster Posted September 22, 2009 Author Report Share Posted September 22, 2009 If we don't get an answer I'll pull it out this weekend and measure it. I haven't seen 192's with mods in a long time. Jim Quote Link to comment Share on other sites More sharing options...
rolli Posted September 22, 2009 Report Share Posted September 22, 2009 i could buy a vanus 175 stem with 1,2mm thread from a local distritbutor, this stem is the right one for the seagul venus 175. i don't know whether you can get this stem also with 0,9 mm thread. i needed the 1,2mm thread stem for the palp crown. note: some members name this movement also lemania. rolli I need the stem size for the hand wind Lemania Asian movement. Does it take a T48 or T 60 crown - .09 or 1.2 Anybody? Thanks. Quote Link to comment Share on other sites More sharing options...
turboGUATE Posted September 22, 2009 Report Share Posted September 22, 2009 Mine has a palp crown fitted with the regular stem it came with. Cheers! Quote Link to comment Share on other sites More sharing options...
docblackrock Posted September 22, 2009 Report Share Posted September 22, 2009 My 192 has a Lello crown fitted - and I can confirm the Seagull movt takes a 0.9mm thread. Not sure about T's crowns though, although you can easily get 0.9-1.2 adapters anyway. Teeth wise, I'd suggest sticking to 48. The T60 is not as we know, accurate and although they look very good on Daylights with the same chrono case as the 192, I still think the 48 is the way to go on the Tanti. Quote Link to comment Share on other sites More sharing options...
Jimster Posted September 23, 2009 Author Report Share Posted September 23, 2009 My 192 has a Lello crown fitted - and I can confirm the Seagull movt takes a 0.9mm thread. Not sure about T's crowns though, although you can easily get 0.9-1.2 adapters anyway. Teeth wise, I'd suggest sticking to 48. The T60 is not as we know, accurate and although they look very good on Daylights with the same chrono case as the 192, I still think the 48 is the way to go on the Tanti. DBR, Thanks very much. I was just starting to remove the caseback and this saves me the work. I'll definitely go with the 48. In fact I went with the 48 on my 188 and it looks great. Any idea where I can get a LH crown guard? Jim Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.