DSSD V5 Problem

[hotbody77]

Hello together,

i have a big problem now. I opened the caseback to remove the movement and to seal the HEV like in gioarmani

[Toadtorrent]

Movement spacer ring can be a bit tight to get settled into the case right. It likely needs to set lower down in the case (towards the crystal). Play with that for a bit to see if it fits better. The groove for the stem is quite large so just because the stem aligns doesn't mean it is seated properly. The movement may site tight with the case with the crown on also because it may be screwed into the case via the tube.

Another sign of improper seating may be gaps between the dial and the other rings from the crystal view.

[gioarmani]

On most V5s, the spacer ring is different than the traditional spacer rings used on other watches. The screws in the ring are actually threaded and positioned so that they work opposite to others--in other words, tightening the screws will loosen the ring & movement inside the case. Loosening the screws by turning as if to unscrew them will actually tighten the movement against the inside of the case.

Try it & see if that helps.