Gatchaman Posted October 7, 2009 Report Share Posted October 7, 2009 Are all low-beat 3717 crap for a 7750 movement swap? Can it be done or don't bother? Link to comment Share on other sites More sharing options...
RWG Technical Posted October 7, 2009 Report Share Posted October 7, 2009 . Link to comment Share on other sites More sharing options...
Gatchaman Posted October 7, 2009 Author Report Share Posted October 7, 2009 (edited) ETA Day wheels will not fit the older A7750 which is a popular upgrade. Due to all the variations in the sizes of the hands between different A7750's, it's not a DIY project without the tooling and skill. If I wanted to purchase a 3717 that could eventually have its movement replaced with a Swiss 7750, which one would you suggest? The one with the low-beat movement or the high-beat Asian 7750 clone? If the Asian 7750 is a true clone, then the stems should be the same to that of its Swiss counterpart, no? Edited October 7, 2009 by Gatchaman Link to comment Share on other sites More sharing options...
RWG Technical Posted October 7, 2009 Report Share Posted October 7, 2009 . Link to comment Share on other sites More sharing options...
Gatchaman Posted October 8, 2009 Author Report Share Posted October 8, 2009 (edited) Sorry, Zigmeister, but nothing you've told me has made any sense. In your first response you said, "ETA Day wheels will not fit the older A7750 which is a popular upgrade." I don't want to mod the cheap Asian movement. I want to replace it with a gen Swiss ETA 7750. All I want to know is which incarnation of the 3717 should I buy, the cheaper 3717 based on the low-beat 7750 or the high-beat (and still Asian) 7750? I plan to take out whichever 7750-copy and replace it with a genuine Swiss ETA 7750 movement. We're talking about 3 different movements here: • Asian low-beat 7750 • Asian high-beat 7750 • Swiss 7750 Which of the Asian movements would require less modifications to the hands (i.e. broaching) for this type of swap? Edited October 8, 2009 by Gatchaman Link to comment Share on other sites More sharing options...
ubiquitous Posted October 8, 2009 Report Share Posted October 8, 2009 Well, the complicated matter of all this is that there are some so-called low beat 21600bph A7750's that have the same pinions of the highbeat 28800bph A7750's. Not all are created equal, but rather from whatever parts are available I'd imagine. You just won't know which you have until you try fitting the hands on the Swiss ETA. The long and short of it all is- No matter which you have, Zig can modify the hands to fit a Swiss 7750 if it's necessary. He did it on my 3717 when I swapped out to Swiss. Link to comment Share on other sites More sharing options...
Gatchaman Posted November 22, 2009 Author Report Share Posted November 22, 2009 . Somebody mentioned that there was a V.2 and V.3 of the 3717. What are the differences? Which is better for the Swiss 7750? Link to comment Share on other sites More sharing options...
ubiquitous Posted November 23, 2009 Report Share Posted November 23, 2009 V2 and V3 all use the same movement. The major differences are the dials, and the AR quality on the crystal. V3 is better than the V2; V2 has all of the hour indicies lumed, which is incorrect; only the 12:00/3:00/6:00/9:00 indicies should be lumed. V1 is better than the V3 as the indicies can be removed and new markers can be created. Movements in all are the A7750; slow beat, high beat or hybrid between the two. No telling what they might put in it, as the factories likely use whatever they have available to them while assembling. Link to comment Share on other sites More sharing options...
Gatchaman Posted November 23, 2009 Author Report Share Posted November 23, 2009 Thank you, Ubi. What version was your 3717? You changed to genuine dial and hands, swapped for a Swiss 7750 movement and, had double AR applied, correct? Did you change crown and pusher at all or performed any modifications to the case? I your 3717! Link to comment Share on other sites More sharing options...
ubiquitous Posted November 23, 2009 Report Share Posted November 23, 2009 Yeah, mine started as a V1; one of the original EL 100. My watch has: -Genuine IWC dial -Genuine hands -Swiss ETA 7750 -Swiss DD wheels (Day is in German ) -Chief AR No other mods. Might swap to a gen movement sometime down the road; I've got other IWC's to work on for the time being, however I have to say that the 3717 has become one of my all time faves... Link to comment Share on other sites More sharing options...
Gatchaman Posted November 23, 2009 Author Report Share Posted November 23, 2009 German date wheels are a must! You gotta love those Tuesday's: DIE! Where did you find the gen dial and hands? Were they pricey? Also, what is EL 100? I can't wait to see your other IWC projects. Link to comment Share on other sites More sharing options...
ubiquitous Posted November 23, 2009 Report Share Posted November 23, 2009 Link to comment Share on other sites More sharing options...
Gatchaman Posted November 24, 2009 Author Report Share Posted November 24, 2009 This is definitely going to be my next project! Even if the watch didn't say IWC, its such a great design. You think the Sinn 356 will ever be rep'ed? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now