Guest Posted October 13, 2009 Report Share Posted October 13, 2009 I have removed the caseback screws and tried to pop it open but nothing much happened, and I missing something? Quote Link to comment Share on other sites More sharing options...
chubbchubb Posted October 13, 2009 Report Share Posted October 13, 2009 Have a look at the pictures of my Rubberclad. They show you how the bezel, case and caseback connect. Once you have removed the caseback, you need to unscrew the little nuts that hold the bezel screws (as seen on DSC_0258.jpg). Quote Link to comment Share on other sites More sharing options...
Francisco Posted October 13, 2009 Report Share Posted October 13, 2009 More info in this tuto, where the movement is reviewed: Regards, Francisco Quote Link to comment Share on other sites More sharing options...
Guest Posted October 14, 2009 Report Share Posted October 14, 2009 definitely have a different version as there are no nuts just holes for the case back screws to go into.... Quote Link to comment Share on other sites More sharing options...
Logan Posted October 14, 2009 Report Share Posted October 14, 2009 I assume you have the seconds at 9 version? I have one of those apart. THere are three main parts, the Bezel, the bezel mounting ring, and the case. In addition the inner bezel ring (printed) mounts in between the Bezel and the bezel mounting ring. The visible rubber gasket is just an o-rong which is put on after everything else is together Everything is glued together.. So to take thing apart you need a small press. Its only low grade glue so mine at least came apart pretty easily. Sorry I don't have any pictures. I used JB Weld to reassemble mine along with the o-rings which were fitted. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.