Rolex Daytona Sec At 6 Problem

[ajoesmith]

Hi

Ive just taken my crown and stem out of my Daytona secs at 6, and taken the movement out to blow out some dust from the crystal. When all is back together the crown goes back in with resounding click but when i pull it out to set the time the whole stem comes out. when i try again the same thing happens.

Please help. What can i do?

Any ideas??

Thanks

[Linder]

It sounds like the crown stem release button was pressed too far during removal and now there is problem with the keyless works.

It is a simple job for a watchmaker, but quite difficult for most of us.

Hopefully I am wrong. Good luck!

[2005SUBMARINER]

if its an asian daytona then i dont think it has the same mechanism as the eta stem relaese buton .

it should be the same as the china 21j movements where you only depress the stem relaease button & should release & enter without any problem .

i would just keep trying to insert the stem in different positions untill you get it right

good luck

[ajoesmith]

if its an asian daytona then i dont think it has the same mechanism as the eta stem relaese buton .

it should be the same as the china 21j movements where you only depress the stem relaease button & should release & enter without any problem .

i would just keep trying to insert the stem in different positions untill you get it right

good luck

Still not working

Any ideas, anyone?

Thanks

[Pugwash]

Still not working

Any ideas, anyone?

Watchmaker. You're not going to get it back in unless you take the dial off and fix the keyless works.