Jump to content
When you buy through links on our site, we may earn an affiliate commission.
  • Current Donation Goals

Recommended Posts

Posted

The bezel ring on my wm9v1 construct turns too stiff. 1/3 of it is stiff the other 2/3s wont turn without using a shirt sleeve to grip and turn it. Originally it came very stiff, I took it apart including the retaining ring and reinstalled. Is there such thing as installing a retaining ring too tight? no gap between the case, which is what i thought was causing friction on the hardware. I loosened it a fraction of a mm and installed the bezel ring with a press cause i couldnt push it on, but even without a click srping (which was bent in the first attempt) it still takes A LOT of effort to rotate. so it's the actual ring interacting with the retaining ring im thinking (tried two different friction washers as well). surely theres some fix for this or something that can be sanded.

any ideas?

Posted

If you have (or can get) some Dykem Blue (machinist's metal dye) you could coat the areas that are suspected, reassemble, rotate through the tight spot one time, and disassemble and see exactly where the contact points are...

Posted

thanks for the reply jmb. The bezel seems to turn freely with everything assemble OFF the case, once I press the retaining ring on and the bezel ring it stiffens right up. I wonder if it expands the metal ring once its pressed on.

Posted

FINALLY fixed it! too much pressure against the case at the bottom of the bezel ring. turns nice now. I believe a gen would have no problem with a tightly installed retaining ring. mine has a 0.20mm gap. willing to bet it's still good to 60meters of water cause of the greased o-ring, tho. Will get it tested once complete. now STILL waiting for slowsaleoutlet to deliver my click spring.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...
Please Sign In or Sign Up